We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Kastar

Kastar NP-FT1 Quadruple USB Camera Battery Charger

SKU CH-0459-NV0DZ

Quadruple USB charger powers four Sony NP-FT1 batteries simultaneously with Micro-USB or Type-C input

  • TypeCharger
  • Pack1 Charger
  • ChemicalNoMEM Li-Ion
  • CapacityNo Battery
  • Dimensions3.5*2*2.5 Inch
  • FeaturesQuadruple USB charger, can charge 4 batteries at the same ti
  • Charge four batteries simultaneously with the quadruple USB design
  • Intelligent display shows charging status and battery capacity for each slot
  • Flexible power input via Micro-USB or USB Type-C with cable included
  • Adjustable output delivers 800 mA for one or two batteries and 500 mA for three or four
  • Interchangeable plates let you swap battery types without buying a new charger

Kastar NP-FT1 Quadruple Charger

The Kastar NP-FT1 is a compact USB charger that accepts up to four Sony NP-FT1 type batteries simultaneously. It draws 5 V at 2–3 A through either a Micro-USB or USB-C port and ships with a USB-C cable. An intelligent display shows charging status and remaining capacity for each slot. The unit measures 3.5 by 2 by 2.5 inches and uses no-memory lithium-ion chemistry.

Suits owners of listed Cyber-shot models.

Photographers using Sony Cyber-shot DSC-T1, T3, T5, T9, T10, T11 or T33 cameras can charge four NP-FT1 packs at once. The charger also matches Sony BC-CS3 and BC-TR1 chargers and works with DSC-L1 and DSC-M series bodies that share the same battery. Users with cameras that require different battery form factors or higher voltage packs cannot use this device.

4.2 V 800 mA per slot for one or two batteries

Output is 4.2 V at 800 mA when one or two batteries are inserted, dropping to 500 mA per slot when three or four are charging. This current profile determines how quickly depleted NP-FT1 cells reach full capacity. Buyers should verify that their packs accept this charge rate before purchasing.

Highlights

  • Charge four batteries simultaneously with the quadruple USB design
  • Intelligent display shows charging status and battery capacity for each slot
  • Flexible power input via Micro-USB or USB Type-C with cable included
  • Adjustable output delivers 800 mA for one or two batteries and 500 mA for three or four
  • Interchangeable plates let you swap battery types without buying a new charger

Specifications

BrandKastar
ModelNP-FT1
Part NumberLHD4-0B-FT1-B
TypeCharger
Pack1 Charger
ChemicalNoMEM Li-Ion
CapacityNo Battery
Dimensions3.5*2*2.5 Inch
FeaturesQuadruple USB charger, can charge 4 batteries at the same time

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the Kastar NP-FT1 charger need a separate power adapter, or can I run it from my existing USB-C power bank?

The charger accepts 5 V 2–3 A through its USB-C or Micro-USB ports, so any USB-C power bank or wall adapter that can supply 15 W will run it without a dedicated brick.

Will the NP-FT1 charge my original Sony NP-FT1 packs at the same speed as the Sony BC-CS3 charger?

It delivers 4.2 V at 800 mA for one or two batteries and 500 mA when three or four are inserted, matching the voltage of the BC-CS3 while splitting current across the extra slots.

How do I know each battery is actually charging and not just sitting in the slot?

The built-in display shows individual charging status and capacity for every bay, so you can confirm each NP-FT1 cell is receiving power and track its progress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.