We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular black charger with LCD screen and three battery slots

Kastar

Kastar LTD2 USB LCD Triple Charger for Topcon BT-60Q/61Q/62Q/65Q/66Q

SKU CH-3WCJ-5NBKD

USB-powered LCD charger replenishes three Topcon survey-instrument batteries simultaneously and shows each cell's status

  • TypeCharger
  • Pack1 Charger
  • ChemicalNoMEM Li-Ion
  • Dimensions3*2*1 Inch
  • FeaturesLCD USB Dual charger, can charge 2 batteries at the same tim
  • Charges three batteries simultaneously for faster field readiness
  • LCD screen shows real-time charging status and battery capacity
  • Powered by any USB 5 V 2 A source for flexible on-site use
  • Compatible with Topcon BT-60Q, BT-61Q, BT-62Q, BT-65Q, BT-66Q packs
  • Works with Topcon GTS-900, GTS-900A, GPT-9000, GPT-9000A total stations

Triple USB Charger for Topcon Batteries

The Kastar LTD2 charges up to three Topcon BT-60Q, BT-61Q, BT-62Q, BT-65Q or BT-66Q Li-Ion packs simultaneously. An integrated LCD shows real-time capacity and charging status for each bay. Power comes from any 5 V 2 A USB source such as a wall adapter, car charger or computer, and a Micro-USB cable is included. The unit measures three by two by one inches for easy field transport.

Survey crews needing multi-bay charging

Field teams running Topcon GTS-900, GTS-900A, GPT-9000 or robotic total stations can keep three spares ready without juggling single-bay chargers. The 8.4 V 0.5 A per bay output matches the original BC-30 and BC-30D specifications. Users who require faster than 0.5 A per cell or need to charge four or more packs at once should consider a higher-current multi-bank solution.

Three simultaneous 8.4 V 0.5 A outputs

Each of the three independent channels delivers 8.4 volts at 0.5 amps, the exact rate specified for Topcon BT-60Q through BT-66Q batteries. This fixed current determines total recharge time and cannot be adjusted. Verify that your survey workflow can accommodate the 0.5 A per bay rate before purchasing.

Highlights

  • Charges three batteries simultaneously for faster field readiness
  • LCD screen shows real-time charging status and battery capacity
  • Powered by any USB 5 V 2 A source for flexible on-site use
  • Compatible with Topcon BT-60Q, BT-61Q, BT-62Q, BT-65Q, BT-66Q packs
  • Works with Topcon GTS-900, GTS-900A, GPT-9000, GPT-9000A total stations

Specifications

BrandKastar
ModelBT-65Q
Part NumberCH-LTD2-0B-BT65Q-C
TypeCharger
Pack1 Charger
ChemicalNoMEM Li-Ion
Dimensions3*2*1 Inch
FeaturesLCD USB Dual charger, can charge 2 batteries at the same time

Questions about this item

How much heat or noise does the Kastar LTD2 produce when charging three Topcon BT-65Q batteries continuously?

The charger runs from a 5 V 2 A USB source with a total 10 W input and 8.4 V 0.5 A per slot, so heat is low and there is no fan to generate noise.

What power source must I already have to run the Kastar LTD2 with my Topcon BT-60Q cells?

Any 5 V 2 A USB wall adapter, car charger or computer port will supply the required 10 W input via the included Micro‑USB cable.

Will the Kastar LTD2 charge the older Topcon BC-30D and BT-30 battery packs used with my GTS-750 total station?

Yes, the charger is listed as compatible with Topcon BC-30, BC-30D and BT-30 models, so it works with those legacy packs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.