We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion camera battery with four LED indicators, 14.4V 6800mAh 98Wh

Kastar

Kastar BP-A60 camera battery 14.4V 6800mAh 98 Wh 1-Pack

SKU CH-FCF1-KYNPQ

A 14.4 V, 6800 mAh, 98 Wh lithium-ion battery with four LED indicators and built-in protection circuits for Canon Cinema EOS and XF cameras

  • TypeBattery
  • Pack1 Battery
  • ChemicalLi-Ion
  • Capacity98 Wh
  • Dimensions3*2*3 Inch
  • FeaturesHigh Capacity and Manufacture Price.
  • Extended runtime with 98 Wh high-capacity cell
  • Clear power monitoring via four LED status indicators
  • Safe operation backed by UL1642 and CE standards
  • Built-in protection against over-charge and over-heating
  • Compatible with Canon EOS C300 Mark II, C300 Mark III and C500 cameras

Battery type and capacity

The Kastar BP-A60 is a lithium-ion camera battery rated at 14.4V and 6800mAh for 98 Wh of energy. It replaces Canon BP-A series packs including the BP-A30, BP-A60, BP-A65 and BP-A90. The single-battery pack suits operators of compatible Canon Cinema EOS and XF camcorders who need a reliable spare or primary power source.

Safety circuit and charge indication

Built-in protection guards against over-charge, over-discharge, over-voltage, over-current and over-heating during normal operation. The cells meet UL1642 and CE safety standards. Four LED indicators on the pack display remaining charge so you can check status at a glance without powering the camera.

Sustained power for long takes

The 98 Wh capacity supports extended recording sessions on cameras such as the EOS C300 Mark II, C300 Mark III, C500 series, C70, C700 and XF605 or XF705. It charges on Canon CG-A10 or CG-A20 chargers. The pack is not suited for users who need hot-swap dual-battery plates or higher-wattage power distribution for accessories.

Highlights

  • Extended runtime with 98 Wh high-capacity cell
  • Clear power monitoring via four LED status indicators
  • Safe operation backed by UL1642 and CE standards
  • Built-in protection against over-charge and over-heating
  • Compatible with Canon EOS C300 Mark II, C300 Mark III and C500 cameras

Specifications

BrandKastar
ModelBP-A60
Part NumberBA-1B-BPA60-C
TypeBattery
Pack1 Battery
ChemicalLi-Ion
Capacity98 Wh
Dimensions3*2*3 Inch
FeaturesHigh Capacity and Manufacture Price.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the BP-A60 battery into my Canon EOS C300 Mark III, and what step do people often miss?

Slide the battery onto the camera's V-mount plate until the latch clicks; the step often missed is confirming all four LED indicators light briefly to verify the protection circuit is active.

What maintenance or replacement will the BP-A60 need after extended use?

The lithium-ion cells gradually lose capacity; plan to replace the pack once run-time drops below your production needs, typically after several hundred charge cycles.

What limit appears first when the BP-A60 runs continuously on a Canon C500 Mark II?

The built-in over-heating protection circuit will cut power before the 98 Wh capacity is fully depleted if internal temperature rises too high during sustained high-draw recording.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.