We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Kastar

Kastar BP-A100 2 Pack Dual D-Tap Charger 98Wh camera battery

SKU CH-BKH7-Q7B5C

Two 98 Wh Li-ion batteries and a dual D-Tap charger with USB output for Canon Cinema EOS and XF cameras

  • TypeBattery & Charger
  • Pack1 Charger + 2 Batteries
  • ChemicalLi-Ion
  • Capacity98 Wh
  • Dimensions6.5*3*2 Inch
  • FeaturesLCD USB Dual charger, can charge 2 batteries at the same tim
  • Two batteries charge simultaneously on one dual D-Tap charger
  • 98 Wh lithium-ion cells deliver 14.4 V for cinema cameras
  • Four-LED indicator shows remaining capacity at a glance
  • USB port supplies 5 V 2.1 A for phones or tablets
  • XLR adapter powers camcorders directly from the charger

Two-pack 98 Wh battery kit

The Kastar BP-A100 kit supplies two 14.4 V lithium-ion batteries rated at 98 Wh each, plus a dual D-Tap charger that powers both units simultaneously. The batteries carry a four-LED capacity indicator and integrate a USB-A port delivering 5 V at 2.1 A for phones or tablets. The charger accepts worldwide AC input from 110 V to 240 V and provides D-Tap output at 16.8 V up to 4.0 A on a single channel or 2 A per channel when both are used.

Cinema camera operators and mobile crews

This set suits professionals using Canon Cinema EOS bodies such as the C200, C300 Mark II, C300 Mark III, C500 Mark II, C70, C700, XF605 or XF705 that accept BP-A series packs. It also serves owners of Canon CG-A10 or CG-A20 chargers seeking a spare dual-bay solution. Users whose cameras require a different battery mount or voltage should look elsewhere, as the D-Tap interface and 14.4 V nominal output are fixed by the BP-A100 design.

98 Wh capacity and 100 W D-Tap output

Each battery stores 6800 mAh at 14.4 V, yielding 98 Wh, while the built-in D-Tap sockets support up to 100 W maximum output for powering accessories. The charger delivers 16.8 V at 4.0 A on one channel or 2 A per channel with two batteries attached, and includes a 4-pin XLR adapter for direct camera power. Buyers needing higher watt-hour packs or a different charging protocol must select another system.

Highlights

  • Two batteries charge simultaneously on one dual D-Tap charger
  • 98 Wh lithium-ion cells deliver 14.4 V for cinema cameras
  • Four-LED indicator shows remaining capacity at a glance
  • USB port supplies 5 V 2.1 A for phones or tablets
  • XLR adapter powers camcorders directly from the charger

Specifications

BrandKastar
ModelBP-A100
Part NumberDUAL-DTAP-2B-BPA100-B
TypeBattery & Charger
Pack1 Charger + 2 Batteries
ChemicalLi-Ion
Capacity98 Wh
Dimensions6.5*3*2 Inch
FeaturesLCD USB Dual charger, can charge 2 batteries at the same time

Questions about this item

How do I mount the BP-A100 packs and connect the charger to the camera?

Slide each 98 Wh battery onto the camera's V-mount plate until it locks, then plug the supplied 4-pin XLR adapter from the charger into the camera's DC input for direct power.

What part of the BP-A100 kit will need replacing first?

The lithium-ion cells inside each 98 Wh pack degrade with cycles; when run-time drops below usable levels, replace the battery pack itself.

Which limit appears first during extended dual-battery charging?

The charger delivers 16.8 V at 2 A per channel when both 98 Wh packs are charging, so sustained dual charging is the first thermal and current limit encountered.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.