We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four Canon-compatible BP-718 batteries and a dual-slot USB charger with LCD screen

Kastar

Kastar BP-718 4-pack battery and LTD2 USB charger for Canon VIXIA HF R32 R36 R37 R38 R40 R42

SKU CH-JVN4-3G9AY

Four 1900 mAh lithium-ion batteries and a dual-slot USB charger with LCD status for Canon VIXIA and LEGRIA camcorders

  • TypeBattery & Charger
  • Pack1 Charger + 4 Batteries
  • ChemicalLi-Ion
  • Capacity7.1 Wh
  • Dimensions5*3*3 Inch
  • FeaturesLCD USB Dual charger, can charge 2 batteries at the same tim
  • Four 1900 mAh Li-Ion batteries extend shooting time
  • Dual-slot USB charger powers two packs simultaneously
  • LCD screen shows real-time charge level per bay
  • Micro-USB and Type-C inputs allow flexible power sources
  • Compatible with Canon BP-709, BP-718, BP-727 and CG-700 models

Four-battery set with dual USB charger for VIXIA

The kit supplies four 3.7 V lithium-ion cells rated at 1900 mAh and 7.1 Wh each, matching the Canon BP-718 form factor. A single LTD2 charger accepts two batteries at once and connects through Micro-USB or USB-C inputs. Compatible camcorders include the VIXIA HF R32, R36, R37, R38, R40 and R42 models.

Sustained charging and run-time behaviour

Each cell delivers 8.4 V at 800 mA whether one or two batteries are seated, so the second slot does not slow the first. The 15 W input limit means a full cycle takes roughly the same wall-clock time regardless of load, and the LCD readout shows live capacity percentage. Heat stays low because the charger regulates current per bay independently.

Installation notes and common issues

Batteries drop into the camcorder exactly like the original BP-718 units, and the charger plates swap without tools for other Canon packs such as BP-709 or BP-727. The only frequent hiccup is forgetting to seat the battery fully in the charger — the LCD will stay blank until the contacts click. A Micro-USB cable is included; USB-C cables must be supplied by the user.

Highlights

  • Four 1900 mAh Li-Ion batteries extend shooting time
  • Dual-slot USB charger powers two packs simultaneously
  • LCD screen shows real-time charge level per bay
  • Micro-USB and Type-C inputs allow flexible power sources
  • Compatible with Canon BP-709, BP-718, BP-727 and CG-700 models

Specifications

BrandKastar
ModelBP-718
Part NumberCH-LTD2-4B-BP718-D
TypeBattery & Charger
Pack1 Charger + 4 Batteries
ChemicalLi-Ion
Capacity7.1 Wh
Dimensions5*3*3 Inch
FeaturesLCD USB Dual charger, can charge 2 batteries at the same time

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the LTD2 charger run hot or make noise when both BP-718 batteries charge at 800 mA for a full day?

The charger draws 5 V at 2–3 A (15 W) and outputs 8.4 V at 800 mA per slot; it has no fan, so heat stays low and operation is silent.

What power source must I already have to run the charger via its Micro-USB or Type-C input?

Any 5 V USB supply that can deliver 2–3 A (15 W) — such as a standard phone charger, power bank or laptop port — will run the LTD2.

Will the BP-718 pack work in my older VIXIA HF R30 or HF R300 without firmware changes?

Yes — the BP-718 replaces Canon BP-709, BP-718 and BP-727 cells, which are the original batteries for the HF R30, R300 and all listed R-series models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.