We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Kastar V-Mount battery kit with two 150Wh units and D-Tap charger

Kastar

Kastar BP-150W V-Mount Battery & D-Tap Charger Kit 150Wh for RED DSMC2 DRAGON-X SCARLET-W

SKU CH-354G-15D5D

V-Mount 150 Wh Li-ion battery kit with two packs and a D-Tap charger featuring OLED status display

  • TypeBattery & Charger
  • Pack1 Charger + 2 Batteries
  • ChemicalLi-Ion
  • Capacity150Wh
  • Dimensions11*4*3 Inch
  • FeaturesD-Tap

Options 1 Charger + 1 Battery

  • Compact 26.4 oz battery fits tight rigs
  • 150Wh capacity powers long shoots
  • OLED shows voltage and remaining capacity
  • D-Tap output runs accessories directly
  • Charger accepts 110–240V worldwide input

150Wh V-Mount Kit for RED DSMC2

The Kastar BP-150W kit supplies two 150Wh Li-ion batteries and a D-Tap charger for RED DSMC2 DRAGON-X and SCARLET-W cameras. Each cell delivers 14.8V and 6.8Ah in a 102 x 72 x 75.5 mm body weighing 26.4 Oz. An integrated OLED panel shows voltage, remaining capacity and USB output status during operation.

Sustained output with MCU protection

The charger accepts worldwide 110-240V input at 50 or 60Hz and provides 16.8V at 3.0A with constant-current control. A built-in MCU halts charging automatically if it detects improper voltage, short circuit or overheating. LED indicators show green for standby and red while charging to prevent overcharge and overdischarge during long sessions.

D-Tap interface limits

Power leaves the battery through a D-Tap port rather than a native camera mount, so cables and adapters must match the camera’s input specification. The 150Wh capacity falls under common air-transport limits for carry-on luggage, but regulations vary by carrier. No other output standards or communication protocols are provided by this kit.

Highlights

  • Compact 26.4 oz battery fits tight rigs
  • 150Wh capacity powers long shoots
  • OLED shows voltage and remaining capacity
  • D-Tap output runs accessories directly
  • Charger accepts 110–240V worldwide input

Specifications

BrandKastar
ModelBP-150W
Part NumberDTAP-1B-BPY150W-3
TypeBattery & Charger
Pack1 Charger + 2 Batteries
ChemicalLi-Ion
Capacity150Wh
Dimensions11*4*3 Inch
FeaturesD-Tap

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 150Wh Li-ion battery generate noticeable heat or noise during all-day shoots?

The battery uses passive cooling with no fan, so it runs silently; its compact 102 x 72 x 75.5 mm body stays cool under normal 14.8V 6.8Ah loads.

What camera-side connector must my RED DSMC2 or SCARLET-W already have to mount this V-Mount pack?

Your camera needs a standard V-Mount plate; the battery slides onto that plate and powers the body through the camera's native V-Lock interface.

Will the 16.8V 3.0A charger safely top up older 150Wh V-Mount packs I already own?

Yes, the charger's 110-240V AC input and 16.8V DC output match the voltage profile of standard 14.8V Li-ion V-Mount batteries, and its MCU stops charging if it detects over-voltage or overheat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.