We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
V-Mount battery pack with D-Tap charger, compact 150Wh Li-ion unit, OLED display visible

Kastar

Kastar BP-150W V-Mount Battery & D-Tap Charger 150Wh

SKU CH-YW6S-0M1AT

V-Mount Li-ion battery kit delivers 150 Wh at 14.8 V with OLED status display and includes a 16.8 V 3.0 A D-Tap charger for worldwide AC input

  • TypeBattery & Charger
  • Pack1 Charger + 2 Batteries
  • ChemicalLi-Ion
  • Capacity150Wh
  • Dimensions11*4*3 Inch
  • FeaturesD-Tap

Options 1 Charger + 1 Battery

  • Compact 26.4 oz design fits easily in a kit bag
  • OLED screen shows voltage, capacity and USB output in real time
  • 150 Wh Li-ion capacity powers cameras through long shoots
  • Charger accepts 110-240 V AC for worldwide use
  • Built-in MCU stops charging on over-voltage, short-circuit or overheat

Kastar BP-150W V-Mount Battery Kit

The Kastar BP-150W kit supplies one charger and two Li-ion batteries, each rated at 150Wh and 14.8V. It fits Sony V-Mount and V-Lock plates used on professional camcorders and broadcast monitors. The pack is aimed at camera operators who need extended run-time for on-location shoots.

Sustained power delivery

Each cell stores 6.8Ah at 14.8V, giving a total of 150Wh per battery for continuous draw. The charger accepts worldwide AC input from 110V to 240V and delivers a steady 16.8V at 3.0A DC. Built-in MCU protection stops the charge cycle automatically if it detects over-voltage, short-circuit or overheat conditions.

Compatibility check before ordering

Verify that your camera or monitor uses the Sony V-Mount / V-Lock interface listed in the compatible model tables. Confirm that your existing charger is among the supported standard or quick-charge units such as the BC-L70 or BC-L160. Ensure the physical footprint of 102mm x 72mm x 75.5mm fits your battery plate or rig.

Highlights

  • Compact 26.4 oz design fits easily in a kit bag
  • OLED screen shows voltage, capacity and USB output in real time
  • 150 Wh Li-ion capacity powers cameras through long shoots
  • Charger accepts 110-240 V AC for worldwide use
  • Built-in MCU stops charging on over-voltage, short-circuit or overheat

Specifications

BrandKastar
ModelBP-150W
Part NumberDTAP-1B-BPY150W-A
TypeBattery & Charger
Pack1 Charger + 2 Batteries
ChemicalLi-Ion
Capacity150Wh
Dimensions11*4*3 Inch
FeaturesD-Tap

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat and noise does the Kastar BP-150W produce when powering a camera all day?

The 150Wh Li-ion pack runs silently with no fan; its built-in MCU shuts the battery down if internal temperature rises too high, so heat stays low during continuous use.

What must I already own to charge the Kastar BP-150W with the included D-Tap charger?

Only a standard AC mains outlet — the charger accepts 110-240 V 50/60 Hz input and delivers 16.8 V 3.0 A DC to the battery via its D-Tap port.

Will the Kastar BP-150W work with my older Sony BVW-300 camcorder that uses V-Mount batteries?

Yes — the BP-150W is listed as compatible with the BVW-300 and other Sony V-Lock models such as the BP-90, BP-95W and BP-190W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.