Kastar SLB-10A 1400mAh camera battery and LTD2 USB dual charger
- Battery & Charger
- 1 Charger + 1 Batte…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kastar
Lithium-ion 1900 mAh camera battery with dual-slot USB charger that powers two cells simultaneously and shows charge status on an LCD
The Kastar 2004 FNP60 kit supplies a 1900mAh lithium-ion cell and an LTD2 dual-slot charger for owners of compatible Fujifilm FinePix, Kodak EasyShare, Panasonic SV-AS and other listed cameras. It replaces the original NP-60, KLIC-5000, CGA-S301 or D-Li7 battery so the shooter can keep working without hunting for a proprietary wall adapter. The bundle suits travel and event photographers who need a lightweight spare power source.
The charger draws 5V at 2-3A, 15W total, and delivers 4.2V at 800mA per slot whether one or two batteries are inserted. No fan is present so operation is silent and heat stays low during typical recharge cycles. Intelligent LED indicators show real-time charging status and remaining capacity without adding audible noise.
A Micro-USB cable is included and the charger accepts both Micro-USB and Type-C inputs for flexible connection to power banks or wall adapters. Interchangeable plates let the same dock charge different battery models from the supported list. No firmware, drivers or companion applications are provided with the package.
| Brand | Kastar |
|---|---|
| Model | FNP60 |
| Part Number | CH-LTD2-1B-FNP60-21 |
| Type | Battery & Charger |
| Pack | 1 Charger + 1 Battery |
| Chemical | Li-Ion |
| Capacity | 7.03 Wh |
| Dimensions | 5*3*2 Inch |
| Features | LCD USB Dual charger, can charge 2 batteries at the same time |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Insert the FNP60 battery into the camera's compartment matching the 3.7V contacts, then place it on the LTD2 plate; connect the charger via Micro-USB or Type-C to a 5V 2-3A source. The step often missed is selecting the correct interchangeable plate for the FNP60 before charging.
The 1900mAh Li-Ion battery will gradually hold less charge after several hundred cycles and should be replaced when runtime drops noticeably. The LTD2 charger has no user-serviceable parts; keep its Micro-USB and Type-C ports clean and ensure the 5V 2-3A input is stable.
The charger outputs 4.2V at 800mA per slot when charging two batteries simultaneously, so total current is shared. The 5V 2-3A 15W input must supply enough power; if the source cannot maintain 2A, charging slows or stops for both cells.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?