We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two Kastar LP-E10 batteries and compact LCD USB dual charger with Micro-USB and Type-C ports

Kastar

Kastar 2-Pack LP-E10 Battery & LTD2 USB Charger

SKU CH-HN9N-FQS53

Two 1650 mAh Li-Ion batteries and a dual USB charger with LCD status for Canon EOS Rebel T3 through T100 models

  • TypeBattery & Charger
  • Pack1 Charger + 2 Batteries
  • ChemicalLi-Ion
  • Capacity12.2 Wh
  • Dimensions5*3*2 Inch
  • FeaturesLCD USB Dual charger, can charge 2 batteries at the same tim
  • Two 1650 mAh batteries extend shooting time
  • LCD USB charger powers two packs simultaneously
  • Micro-USB and Type-C inputs add charging flexibility
  • Intelligent display shows real-time capacity status
  • Compatible with Canon Rebel T3 through T100 models

Two batteries and a dual USB charger

This pack supplies two 1650 mAh lithium-ion batteries and a single LTD2 charger that powers both at once. It replaces the Canon LP-E10 cell and LC-E10 charger used across several EOS Rebel and Kiss models.

Charger input 5 V and 15 W output

The charger accepts 5 V at 2 to 3 A through Micro-USB or Type-C and delivers 8.4 V at 800 mA per slot. An LCD shows charge level and status while the unit runs from any standard USB power source.

Compact size and swappable plates

Measuring 5 by 3 by 2 inches the kit fits easily in a camera bag. The charger design allows plate changes for other battery types, though this pack is dedicated to the LP-E10 form factor.

Highlights

  • Two 1650 mAh batteries extend shooting time
  • LCD USB charger powers two packs simultaneously
  • Micro-USB and Type-C inputs add charging flexibility
  • Intelligent display shows real-time capacity status
  • Compatible with Canon Rebel T3 through T100 models

Specifications

BrandKastar
ModelLP-E10
Part NumberCH-LTD2-2B-LPE10-C
TypeBattery & Charger
Pack1 Charger + 2 Batteries
ChemicalLi-Ion
Capacity12.2 Wh
Dimensions5*3*2 Inch
FeaturesLCD USB Dual charger, can charge 2 batteries at the same time

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the LP-E10 batteries and charger, and what step do people often miss?

Insert each 1650mAh LP-E10 battery into the LTD2 dual charger, connect a 5V 2-3A USB power source via Micro-USB or Type-C, and ensure both battery plates are seated so the LCD shows dual 800mA charging.

What maintenance or replacement will the LP-E10 batteries and LTD2 charger need later?

The 7.4V 1650mAh Li-Ion batteries typically last 300-500 cycles before capacity drops below 80%; the LTD2 charger has no user-serviceable parts and only needs the USB cable replaced if damaged.

What limit appears first when charging two LP-E10 batteries continuously on the LTD2 charger?

The charger outputs 8.4V 800mA per slot; sustained dual charging is limited by the 15W input ceiling, so a 5V 2A source may throttle before both 12.2 Wh packs reach full.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.