Kanto
Kanto PT400 tilting TV mount 40-90" 150 lbs 12° 1.4
Tilts a 40- to 90-inch TV up to 12 degrees forward while sitting 1.4 inches from the wall, supports 150 lbs and fits 16 or 24-inch studs
- Install LocationWall
- Mount StyleTilting Low-Profile
- MaterialSolid steel construction with durable powder coated finish
- ColorBlack
- FixedYes
- TV Size Capacity< 90"
- Reduces glare with 12° forward tilt
- Sits 1.4 inches from wall for low profile
- Fits 16 and 24-inch stud centers with 35-inch plate
- Quick-release cords allow easy TV removal
- Torx screws and lock deter theft
Ideal for large screens
The Kanto PT400 is a low-profile tilting mount built for flat-panel TVs from 40 to 90 inches. Its solid steel construction supports displays weighing up to 150 lbs and fits VESA patterns ranging from 100 x 100 up to 800 x 400 mm. UL certification confirms the structural rating for residential and light-commercial installs.
Thermals noise and power
This passive mounting hardware generates no heat, draws no power and produces no audible noise during operation. The 1.4 inch stand-off creates a slim air gap behind the screen that allows natural convection around the TV chassis without any fan assistance.
Build quality and daily use
A 35 inch wide wall plate spans 16 and 24 inch stud centres, simplifying alignment on wood or concrete. Post-installation leveling screws let you fine-tune the picture after the TV is hung. Quick-release cords enable one-person removal for servicing, while Torx security screws and a locking bar deter unauthorised detachment.
Highlights
- Reduces glare with 12° forward tilt
- Sits 1.4 inches from wall for low profile
- Fits 16 and 24-inch stud centers with 35-inch plate
- Quick-release cords allow easy TV removal
- Torx screws and lock deter theft
Specifications
| Brand | Kanto |
|---|---|
| Series | PT |
| Model | PT400 |
| Install Location | Wall |
| Mount Style | Tilting Low-Profile |
| Material | Solid steel construction with durable powder coated finish |
| Color | Black |
| Fixed | Yes |
| TV Size Capacity | < 90" |
| TV Weight Capacity | Max. load 150 lbs. |
| VESA Compatible | Yes |
| Distance from Wall | 1.4 inches |
| Tilt Range | 12 degrees |
| UL Certified | Yes |
| Cable Management | Yes |
| Feature | 12 DEGREES OF TILT - Tilt your TV up to 12 degrees forward to reduce glare and improve line-of-sight with the screen. LOW PROFILE DESIGN - Measuring 1.4 inch thick, the PT400 allows your TV to sit remarkably close to the wall. EXTRA WIDE WALL PLATE - The 35 inch wide wall plate can be installed across three studs with 16 inch spacing, or two studs with 24 inch spacing. POST-INSTALLATION LEVELING - Easily level your TV with two adjustable screws. ADDED SECURITY - Torx screws and a locking feature prevent theft (lock not included) |
| Height | 16.7 inches |
| Width | 34.8 inches |
| Depth | 1.4 inches |
| Weight | 8.2 pounds |
| Shipping weight | 4.99 kg |
| Package size | 919 × 178 × 84 mm |
Questions about this item
How do I mount the PT400 on 16-inch or 24-inch studs and what step do people miss?
Use the 35-inch wide wall plate to span 16 or 24-inch centers, then level the TV with the post-installation adjustment screws before tightening them fully.
Which parts of the PT400 might need replacement over time?
The quick-release cords and Torx security screws are the only moving or removable hardware; replace them if the cords fray or the screw heads strip.
At what tilt angle does the PT400 stop, and why does that limit appear first?
The mount stops at 12 degrees of forward tilt; this mechanical limit is reached before any weight or clearance constraint because the brackets physically prevent further movement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIERRA WIRELESS DATA INC
SIERRA WIRELESS DATA INC 6001363 6-in-1 Dome TV Antenna
$202.99
0.00244381BTC
In stock
NEC Display Solutions
NEC Display Solutions 10 Point Infrared Touch Overlay for C431 OLR431R
$326.99
0.00393665BTC
In stock