Kanto
Kanto PS400SG Full Motion Outdoor TV Mount 30-70" 88lb 27.6" Extension Black
Full-motion outdoor TV mount for 30–70 inch screens up to 88 lb, extending 27.6 inches with 90-degree swivel and corrosion-resistant stainless-steel construction
- TypeWall Mount
- Compatibility30"-70"
- Fits TVs from 30 to 70 inches for versatile outdoor placement
- Extends 27.6 inches to bring the screen closer to any seating area
- Swivels up to 90 degrees left or right for flexible viewing angles
- Galvanized and stainless steel construction resists rust through rain, sun and snow
- Retracts to 1.9 inches from the wall for a clean, low-profile look
Outdoor TV Mount 30-70
The Kanto PS400SG is a full-motion wall mount built for outdoor installation. It fits televisions from 30 to 70 inches and supports up to 88lb. Galvanized and stainless steel construction with a powder-coated finish resists corrosion from rain, sun and snow. The mount attaches to a single wood stud or concrete surface.
27.6" Extension and Articulation Range
The arm extends 27.6 inches from the wall and retracts to 1.9 inches. It provides 12 degrees forward tilt, 2 degrees backward tilt and 90 degrees swivel left or right. This range lets you position the screen for varied seating layouts. The mount accommodates VESA patterns from 100x100 to 400x400mm.
Single Stud and Weight Constraints
Installation requires a single structural stud or concrete anchor capable of carrying the combined load. The 88lb maximum capacity limits use with heavier displays. The fixed VESA range of 100x100 to 400x400mm excludes screens with larger mounting patterns. Buyers needing support for heavier TVs or wider VESA spacing should consider a different mount.
Highlights
- Fits TVs from 30 to 70 inches for versatile outdoor placement
- Extends 27.6 inches to bring the screen closer to any seating area
- Swivels up to 90 degrees left or right for flexible viewing angles
- Galvanized and stainless steel construction resists rust through rain, sun and snow
- Retracts to 1.9 inches from the wall for a clean, low-profile look
Specifications
| Brand | Kanto |
|---|---|
| Model | PS400SG |
| Type | Wall Mount |
| Compatibility | 30"-70" |
| Shipping weight | 7.30 kg |
| Package size | 701 × 361 × 251 mm |
Questions about this item
Will the 27.6" extension reach past my deck railing if the wall plate sits on a single stud?
The arm extends 27.6" from the wall and mounts to a single wood stud or concrete, so measure from that stud to the railing to confirm clearance.
How can I confirm the 12° forward tilt is holding after I level the TV?
Use the adjustable horizontal leveling on the wall plate, then check the bubble level on the mount arm; the tilt locks at 12° forward or 2° back.
Does the box include the lag bolts and security screws for a 400x400 VESA TV, or must I buy them?
The box includes the mount, wall-plate template, all installation hardware, lag-bolt covers, security TV screws and manual — nothing extra is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



