We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Kanto

Kanto DM1 Monitor Mount 17-40" 22 lb Spring Arm Black

SKU CH-WMCS-8YYMB MPN DM1

Single monitor arm fits 17-40 inch displays up to 22 lb with spring-assisted height adjustment, tilt, swivel and top-mount clamp

  • TypeMonitor Mounts & Stands
  • Cabinet ColorBlack
  • Sports TeamNO
  • Size17" - 40"
  • Supports monitors from 17" to 40" for versatile screen compatibility
  • Spring-assisted arm adjusts height 9.9" with fingertip control
  • Extends reach up to 21.7" for flexible positioning
  • Tilts ±75° and swivels 90° for optimal viewing angles
  • Top-mount clamp installs from above the desk for easy setup

Single-Arm Monitor Mount for 17-40 Inch Displays

The Kanto DM1 is a single-arm desktop mount built for flat, curved, or ultrawide monitors measuring 17 to 40 inches. It supports screens weighing between 4.4 lb and 22 lb. The aluminium frame clamps to the top of a desk for straightforward installation. It suits home offices, creative workstations, or any desk where a single screen needs flexible positioning.

VESA 75x75 and 100x100 Compatibility Limits

This arm only fits monitors with VESA mounting patterns of 75x75 mm or 100x100 mm; screens using larger or non-standard hole spacing cannot be attached. The spring-assisted mechanism requires a monitor weight between 4.4 lb and 22 lb to counter-balance correctly; lighter or heavier displays will not stay in place. Maximum reach is 21.7 inches, so very deep desks may limit how far the screen can be pulled forward.

22 lb Weight Capacity Decides Suitability

The 22 lb (10 kg) upper limit is the single specification that determines whether your monitor can be used safely with this arm. If your screen exceeds this weight, the spring tension cannot hold it and the mount will fail. Displays below 4.4 lb will not provide enough force to engage the height-adjustment range of 9.9 inches. Verify your monitor's exact weight against this 22 lb ceiling before purchasing.

Highlights

  • Supports monitors from 17" to 40" for versatile screen compatibility
  • Spring-assisted arm adjusts height 9.9" with fingertip control
  • Extends reach up to 21.7" for flexible positioning
  • Tilts ±75° and swivels 90° for optimal viewing angles
  • Top-mount clamp installs from above the desk for easy setup

Specifications

BrandKanto
ModelDM1
Part NumberDM1
TypeMonitor Mounts & Stands
Cabinet ColorBlack
Sports TeamNO
Size17" - 40"
Shipping weight3.31 kg
Package size419 × 157 × 135 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I know if my monitor fits the DM1 arm?

The arm fits flat, curved or ultrawide screens from 17 to 40 inches that weigh between 4.4 lb and 22 lb and use a 75x75 or 100x100 VESA pattern.

What does the 21.7 inch reach figure mean when the arm is on my desk?

It is the maximum horizontal extension from the clamp centre, so your screen can sit up to 55.1 cm farther forward or back than the mounting point.

What desk thickness does the top-mount clamp accept?

The clamp tightens from above the desk surface; the supplied hardware secures it without needing access underneath.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.