Kamrexi DTJ001 6PCS RGB LED Lamp Kit
Six RGB LED lamps with remote control offer 15 colours, adjustable brightness and a 1.5 m USB power cable for Bambu Lab printers and general lighting
- Size/Dimensions7.2898 cm x 10.3886 cm x 31.3944 cm
- Compatibility/FitmentDTJ001, Kamrexi
- Six lamps light Bambu Lab printers and DIY enclosures
- Remote selects 15 RGB colours with stepless brightness
- 4 W LED modules in aluminium housings run cool
- 5 m USB cable powers from chargers, PCs or power banks
- Compact 7.2898 cm x 10.3886 cm x 31.3944 cm kit suits home, office or camping
Kamrexi DTJ001 6-Piece RGB LED Kit
The Kamrexi DTJ001 kit includes six RGB LED lamps designed for integration with Bambu Lab 3D printers including H2D, A1, A1mini, P1S, P1P, X1C and X1E models. Each unit features a 4W LED source housed in aluminium alloy and measures 7.2898 cm by 10.3886 cm by 31.3944 cm. A 1.5 m USB cable provides power via any 5V 1A Type-A port.
Makers adding enclosure lighting
This kit suits hobbyists building custom 3D-printed lamp housings or upgrading printer enclosures with remote-controlled colour effects. Users needing a single integrated fixture, mains-powered operation or weather-sealed outdoor ratings should look at other solutions.
Remote offers 15 colours and dimming
The included remote controls 15 distinct RGB colours, adjustable dynamic mode speeds and stepless brightness, letting you match lighting to any print monitoring or ambient requirement.
Highlights
- Six lamps light Bambu Lab printers and DIY enclosures
- Remote selects 15 RGB colours with stepless brightness
- 4 W LED modules in aluminium housings run cool
- 5 m USB cable powers from chargers, PCs or power banks
- Compact 7.2898 cm x 10.3886 cm x 31.3944 cm kit suits home, office or camping
Specifications
| Brand | Kamrexi |
|---|---|
| Size/Dimensions | 7.2898 cm x 10.3886 cm x 31.3944 cm |
| Compatibility/Fitment | DTJ001, Kamrexi |
| Part Number | DTJ001 |
Questions about this item
Does the 4 W LED kit run hot or draw much power during long prints?
Each lamp uses a 4 W LED and runs from a 5 V / 1 A USB port, so heat and power draw stay low even during extended sessions.
What power source do I need to run the six lamps?
A single 5 V / 1 A Type-A USB port — such as a phone charger, PC USB socket or power bank — powers the whole kit via the included 1.5 m cable.
Will the remote control still work if I keep my older Bambu Lab printer inside an enclosure?
Yes, the remote controls all 15 colours, dynamic modes and stepless brightness through the enclosure, and the kit is listed as compatible with H2D, A1, A1 mini, P1S, P1P, X1C and X1E models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
