We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of satin chrome mortise lock cylinders with keys

Kaba Ilco Corp

Kaba Ilco Corp Mortise Lockset Cylinder Satin Chrome PK 2

SKU CH-STEE-TN9YH

Satin chrome mortise cylinder with Schlage C keyway, ANSI Grade 1 brass construction, rekeyable, two keys included

  • Type1" Mortise Cylinder
  • Grade 1 security meets ANSI A156.5 standard
  • Satin chrome finish resists wear and corrosion
  • Brass construction provides lasting strength
  • Rekeyable to original manufacturer systems
  • Keyed alike with two Schlage C keys included

1" Mortise Cylinder Pair

This pack contains two commercial-grade mortise cylinders with a satin chrome finish. They suit doors prepared for a one-inch mortise pocket and are keyed alike for single-key convenience.

Brass Construction with Schlage C Keyway

Solid brass bodies meet ANSI A156.5 Grade 1 standards for durability. The Schlage C five-pin keyway allows rekeying to match existing Schlage systems, and each cylinder includes a turn knob, dummy trim and two keys.

Rekeyable Cylinders for Standard Mortise Prep

The cylinders operate mechanically without external power, so there are no thermal, noise or electrical considerations. California Proposition 65 warnings apply because the brass components contain listed chemicals.

Highlights

  • Grade 1 security meets ANSI A156.5 standard
  • Satin chrome finish resists wear and corrosion
  • Brass construction provides lasting strength
  • Rekeyable to original manufacturer systems
  • Keyed alike with two Schlage C keys included

Specifications

BrandKaba Ilco
Type1" Mortise Cylinder

Questions about this item

Does the ANSI A 156.5 Grade 1 standard cap the cylinder's physical size or its security rating?

The ANSI A 156.5 Grade 1 standard rates the cylinder's security and durability performance, not its physical dimensions.

What door thickness and mortise pocket depth does the 1-inch mortise cylinder require to fit?

The 1-inch mortise cylinder fits standard mortise lock bodies with a matching 1-inch cylinder bore; verify your lock body accepts this length.

How is the Schlage C keyway cylinder installed, and which step do installers often miss?

Thread the cylinder into the mortise body, secure the set screw, then test both keys; the step often missed is tightening the set screw fully after alignment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.