We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polished brass dummy mortise cylinder with thumb turn, 1-1/4 inch length

Kaba Group

Kaba Group 7200DC-03 Polished Brass 1-1/4" Dummy Mortise Cylinder Door Lock

SKU CH-27RN-W089H MPN 7200DC-03

Solid brass dummy mortise cylinder with 1.150 x 32 UNS thread and 1.360 inch face fits standard mortise locks

  • FinishPolished Brass
  • Selling UnitBox
  • KeyingKeyed Different
  • Solid brass construction resists corrosion and wear
  • Polished brass US3 finish suits classic door hardware
  • 1-1/4 inch length fits standard mortise lock cavities
  • Adams Rite cam #2 works with common latch mechanisms
  • Thumb-turn operation needs no key for quick exit

Solid Brass Dummy Cylinder

The Kaba Group 7200DC-03 is a solid brass dummy mortise cylinder finished in polished brass US3. It provides a thumb-turn actuator without a keyway for interior or exterior doors that need a fixed turn piece. The 1-1/4 inch length suits standard door thicknesses.

Thread and Cam Compatibility

This cylinder replaces an existing mortise unit that uses a 1.150 x 32 UNS thread and an Adams Rite Cam #2. The upgrade is worth it when the old cylinder face measures 1.360 inches or 34.5 mm and the lock body accepts the same thread pitch.

Mortise Lock Fit Limits

The dummy function means no key operation is possible from either side. It will not work where a keyed cylinder or a double-cylinder keyway is required. The fixed 1-1/4 inch length and specific cam restrict use to mortise locks matching those exact dimensions.

Highlights

  • Solid brass construction resists corrosion and wear
  • Polished brass US3 finish suits classic door hardware
  • 1-1/4 inch length fits standard mortise lock cavities
  • Adams Rite cam #2 works with common latch mechanisms
  • Thumb-turn operation needs no key for quick exit

Specifications

BrandIlco
Model7200DC-03
FinishPolished Brass
Selling UnitBox
KeyingKeyed Different

Questions about this item

What thread size and cylinder face diameter does the 7200DC-03 need to fit my mortise lock?

The cylinder uses a 1.150 x 32 UNS thread and a 1.360 (34.5mm) face diameter, matching standard mortise lock preparations.

How is the Adams Rite Cam #2 oriented during installation, and what step is often missed?

Insert the cylinder so the cam engages the lock body, then tighten the set screw; the missed step is verifying the cam rotates freely before final tightening.

Will the solid brass finish or the thumb-turn mechanism need periodic maintenance?

The US3 polished brass may darken over time and can be restored with brass polish; the thumb turn has no keyway to lubricate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.