Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00931958BTC
In stock
Kaba Group
Kaba Group 7165-46 Duranodic 1" Mortise Cylinder Door Lock
Solid brass mortise cylinder with Duranodic finish, Adams Rite cam, 5-pin tumbler and 1.150 x 32 UNS thread for standard 1-inch door installations
- FinishDuranodic
- Selling UnitEach
- TypeMortise Cylinder
- KeyingKeyed Different
- Solid brass construction resists corrosion and wear
- Duranodic finish provides durable, low-maintenance surface protection
- 150 x 32 UNS thread fits standard mortise lock bodies
- 5 mm cylinder face diameter matches common door prep
- Adams Rite #2 cam operates with existing hardware
Solid brass mortise cylinder
The Ilco 7165-46 is a solid brass mortise cylinder built for replacement in residential and commercial doors. Its Duranodic finish resists wear on interior and exterior entries. The cylinder uses a standard 5 pin tumbler and ships keyed different for immediate installation.
Thread specification decides fit
Compatibility rests on the 1.150 x 32 UNS thread and 1.360 inch (34.5 mm) face diameter. The included Adams Rite #2 cam operates common mortise locks, though other cams may be substituted. Verify these dimensions against the existing hardware before purchase.
One inch length covers standard doors
The 1 inch cylinder length suits typical door thicknesses found in most retrofit projects. Thicker doors will require a longer cylinder, which is not supplied with this model. The solid brass body provides durable operation within those limits.
Highlights
- Solid brass construction resists corrosion and wear
- Duranodic finish provides durable, low-maintenance surface protection
- 150 x 32 UNS thread fits standard mortise lock bodies
- 5 mm cylinder face diameter matches common door prep
- Adams Rite #2 cam operates with existing hardware
Specifications
| Brand | Ilco |
|---|---|
| Model | 7165-46 |
| Finish | Duranodic |
| Selling Unit | Each |
| Type | Mortise Cylinder |
| Keying | Keyed Different |
Questions about this item
What does the 1" length mean once the cylinder is installed in a mortise lock?
The 1" measurement is the cylinder body length that threads into the lock body; it suits doors built for a one-inch mortise cylinder.
How does the 1.150 x 32 UNS thread standard affect compatibility?
The 1.150 x 32 UNS threads match the common mortise lock housing, so the cylinder screws in without adapters.
What clearance does the 1.360 inch (34.5 mm) cylinder face need in the door prep?
The face diameter requires a 1.360 inch (34.5 mm) bore in the door for the cylinder collar to sit flush.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
