We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Solid brass mortise cylinder, Duranodic black finish, 1 inch length, Adams Rite cam, thumb turn only

Kaba Group

Kaba Group 7161TK2-46 1" Mortise Turn Knob Cylinder Door Lock

SKU CH-Q8MD-976MB MPN 7161TK2-46

Duranodic solid brass mortise turn-knob cylinder with Adams Rite Cam #2, 1.150 x 32 UNS thread and 34.5 mm face diameter

  • FinishBlack
  • Selling UnitBox
  • KeyingKeyed Different
  • Solid brass construction resists wear and corrosion
  • Duranodic black finish suits indoor and outdoor settings
  • Thumb-turn operation allows keyless exit from inside
  • Adams Rite #2 cam fits common mortise lock bodies
  • 150 × 32 UNS thread matches standard cylinder housings

1" Mortise Turn Knob Cylinder

This solid brass cylinder replaces the core in Adams Rite style mortise locks. It suits residential and light commercial doors where a thumb turn on the inside and no key on the outside are required. The Duranodic finish matches dark bronze hardware. It is sold keyed different for individual access control.

Installation fits standard mortise prep

The cylinder threads into a 1.150 x 32 UNS bore with a 1.360 inch face diameter. A 1 inch body length matches common door thicknesses. The Adams Rite Cam #2 engages the latch bolt directly. Mis‑threading or forcing the cylinder into a non‑standard cam pocket are the usual issues; verify the cam cutout before tightening.

5 pin tumbler with thumb turn only

The five pin chamber provides basic pick resistance for interior offices, store rooms or secondary entries. It does not accept a key on the exterior, so it cannot secure a primary entrance that requires keyed access from both sides. For doors needing double cylinder function, a different cylinder type is required.

Highlights

  • Solid brass construction resists wear and corrosion
  • Duranodic black finish suits indoor and outdoor settings
  • Thumb-turn operation allows keyless exit from inside
  • Adams Rite #2 cam fits common mortise lock bodies
  • 150 × 32 UNS thread matches standard cylinder housings

Specifications

BrandIlco
Model7161TK2-46
FinishBlack
Selling UnitBox
KeyingKeyed Different

Questions about this item

How do I confirm the 1.360 inch cylinder face seats flush after installing the 1" mortise turn knob cylinder?

Thread the cylinder into the mortise body until the 1.360 inch face sits flat against the door surface, then operate the thumb turn through a full rotation — the Adams Rite cam should engage the latch smoothly without binding.

What components come in the box and what must I supply separately?

The box contains the solid brass cylinder with the Adams Rite #2 cam installed and the 1.150 x 32 UNS threads; you must provide the mortise lock body, mounting screws and any strike plate required for your door.

Which cylinder length should I select for my door thickness?

Choose the 1" length when your door thickness matches that cylinder size; other lengths are offered for thicker or thinner doors, so measure the existing cylinder or door before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.