We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round amber LED strobe beacon with four heads, IP67 rated, 120V AC permanent mount

K&E Safety

K&E Safety M490 LED A Warning Strobe Amber 120VAC light kit

SKU CH-XSZ5-99Z8M

Amber LED warning strobe kit with four flashing heads for 120 V AC permanent mounting on forklifts and work trucks

  • Amber LED flashes for clear hazard signaling
  • IP67 rating resists dust and water ingress
  • 120 V AC power suits fixed site wiring
  • Four heads cover multiple viewing angles
  • Compact 3 7/8 in diameter fits tight mounts

Product Identity

The K&E Safety M490 is a round amber LED strobe beacon rated for 120 V AC permanent mounting. It targets operators of forklifts, PIT vehicles, utility vehicles and work trucks who need a flashing warning light with an IP67 enclosure.

Installation Checklist

Verify that the mounting surface accepts a 3 7/8 inch diameter base and that a 120 V AC supply is available at the install point. Confirm the 30 AWG wire leads can reach your junction box without splicing and that local regulations permit an SAE-unrated amber beacon on the intended vehicle class.

Thermal and Electrical Behaviour

At 5 watts the LED array runs cool during continuous flashing cycles and the sealed housing prevents dust or water ingress under normal wash-down conditions. The unit draws minimal current from a standard 120 V AC circuit and produces no audible noise because it contains no moving parts or cooling fans.

Highlights

  • Amber LED flashes for clear hazard signaling
  • IP67 rating resists dust and water ingress
  • 120 V AC power suits fixed site wiring
  • Four heads cover multiple viewing angles
  • Compact 3 7/8 in diameter fits tight mounts

Specifications

BrandRAILHEAD GEAR

Questions about this item

Does the kit include mounting hardware or only the four strobe heads and 30 AWG wires?

The kit contains four LED strobe heads with integrated 30 AWG wires; mounting brackets and fasteners are not included and must be sourced separately.

Should I choose the 120 V AC amber model or look for a different voltage?

This model operates on 120 V AC only; if your forklift or utility vehicle runs on a different supply voltage you will need a separate power converter or a different strobe kit.

What does the IP67 rating mean when the strobes are mounted on a work truck?

IP67 means each head is dust-tight and can survive temporary immersion in water, so the strobes stay operational through wash-downs and heavy rain on site.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.