JVC
JVC HARX700 headphone, black, 50mm driver, 6.3mm plug, 11.48 ft cable
Full-size stereo headphones with a 50mm neodymium driver, 8Hz–25kHz response, gold-plated 6.3mm plug and 11.48ft cable
- TypeHeadphone
- ColorBlack
- Driver Unit1.95"
- Frequency Response8Hz-25KHz
- Input Impedance48 ohms
- Sensitivity105dB S.P.L. at 1KHz
- Deep bass from 50mm neodymium driver
- Extended 8Hz-25kHz frequency response
- Gold-plated 6.3mm connector ensures signal quality
- 48 ft cable gives freedom of movement
- Wide head pad plus 11.64 oz weight for comfort
Full-size stereo headphone for home listening
The JVC HARX700 is a wired over-ear headphone designed for stationary use. Its 50 mm neodymium driver units and ring port structure deliver a frequency response of 8 Hz to 25 kHz with 105 dB sensitivity at 1 kHz. A wide head pad and ear-cup form factor aim to provide comfort during extended sessions. The 11.48 ft cable terminates in a gold-plated 6.3 mm connector.
Suited to desk-based listeners with 6.3 mm outputs
This model fits users who connect directly to audio interfaces, amplifiers or receivers equipped with a 6.3 mm jack and who prefer a long tether for freedom of movement around a workstation. Buyers who need a shorter cable, a different connector format, or a portable design should consider other options.
6.3 mm gold-plated connector decides compatibility
The supplied plug is a 6.3 mm gold-plated mini-phone connector; verify that your source device accepts this exact interface before purchase. No adapter is mentioned in the specifications, so the connector type is the single specification that determines whether the headphone can be used with your equipment.
Highlights
- Deep bass from 50mm neodymium driver
- Extended 8Hz-25kHz frequency response
- Gold-plated 6.3mm connector ensures signal quality
- 48 ft cable gives freedom of movement
- Wide head pad plus 11.64 oz weight for comfort
Specifications
| Brand | JVC |
|---|---|
| Model | HARX700 |
| Type | Headphone |
| Color | Black |
| Driver Unit | 1.95" |
| Frequency Response | 8Hz-25KHz |
| Input Impedance | 48 ohms |
| Sensitivity | 105dB S.P.L. at 1KHz |
| Connector | 6.3mm |
| Cord Length | 11.48 ft. |
| Weight | 11.64 oz |
| Features | Deep bass sound reproduction with 50mm Neodymium driver unit and ring port structure Ring port structure provides high-quality dynamic sound Wide head pad for optimum comfort Magnet type: Neodymium Plug: Gold Plated Accessory: 0.25" plug adapter |
| Shipping weight | 0.68 kg |
| Package size | 330 × 259 × 121 mm |
Questions about this item
How much power do the 48-ohm drivers draw from a portable source during long listening sessions?
The 48-ohm impedance and 105dB sensitivity mean the headphones reach loud volume with very little current, so a phone or laptop can drive them all day without draining its battery faster than usual.
What connector must my audio device already have for the 6.3mm plug to work without an extra adapter?
You need a 6.3mm (1/4-inch) jack; the cable terminates in a gold-plated 6.3mm plug and no smaller adapter is included in the box.
Will the 11.48 ft cable reach from my floor-standing receiver to my favourite chair without pulling tight?
At 11.48 ft the cord gives generous slack for a typical living-room layout, letting you sit several feet away from the source without tension on the headband.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



