JVC
JVC DLA-RS35 Projector Lamp 200W 2000 Hrs
A 200W replacement lamp module with 2,000 hours rated life for JVC DLA-RS35 projectors
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- Genuine Philips 200W UHP bulb delivers reliable brightness
- 2000-hour rated life supports extended viewing
- Manufactured to ISO 9001 quality standards
- Direct-fit housing matches JVC DLA-RS35 projector
Ready-to-fit replacement lamp
The JVC DLA-RS35 lamp module ships with a new Philips UHP 200W bulb already seated in its housing, so the unit slides straight into compatible JVC projectors without extra assembly. It is aimed at owners who need a direct swap when the original lamp reaches end of life.
Rated output and runtime
The lamp draws 200W and is rated for 2,000 hours of typical use, after which brightness will decline and replacement is advised. Projectors that demand a different wattage or lamp code cannot accept this module, and no adapter or converter exists to bridge that gap.
Simple swap with care
Installation consists of removing the old cassette, inserting the new one and resetting the projector’s lamp timer through the on-screen menu. The most common error is forgetting the timer reset, which leaves the warning active and can trigger an early shutdown. Dust on the lens or housing vents can also reduce airflow and shorten the rated 2,000-hour span.
Highlights
- Ready-to-install module saves setup time
- Genuine Philips 200W UHP bulb delivers reliable brightness
- 2000-hour rated life supports extended viewing
- Manufactured to ISO 9001 quality standards
- Direct-fit housing matches JVC DLA-RS35 projector
Specifications
| Brand | JVC |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which version of the JVC DLA-RS35 lamp should I choose?
Four versions are offered: the original OEM lamp from the bulb maker, the same OEM lamp sold by JVC, an OEM lamp from a different bulb manufacturer, and an economical compatible module built with genuine OEM parts.
What does the 200 W rating mean once the lamp is installed?
The 200 W figure is the electrical power the UHP bulb draws during operation; it determines the light output and heat the projector must handle.
What standard governs the lamp's manufacturing quality?
Each unit is produced under ISO 9001 quality controls covering beam performance, ignition, voltage, appearance, connections and run-time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



