Johnson Controls Inc
Johnson Controls V11HDA-100 Solenoid Air Valve 440/480VAC 0-25 psi 1.5 cfm
Controls air flow for smoke dampers at 440/480 VAC with 0-25 psi range and 1.5 cfm consumption
- TypeThermostats & HVAC
- Direct-acting control for precise air regulation
- 5 cfm air consumption supports smoke-damper operation
- 440/480 VAC 50/60 Hz suits industrial power supplies
- 0-25 psi range handles low-pressure pneumatic systems
- Die-cast aluminium body with steel cover resists harsh environments
Industrial smoke-damper valve
The Johnson Controls V11HDA-100 is a three-way solenoid air valve built for HVAC smoke-damper applications. Its die-cast aluminum body and steel cover handle air media in versatile mounting orientations. The unit operates on 440/480 VAC at 50/60 Hz with soldered 18 in electrical leads housed in a junction-box enclosure.
Pressure-range match
The valve controls 0-25 psi with a 1.5 cfm air-consumption rating, so the single specification that decides fit is whether the system pressure stays inside that band. Direct-acting and reverse-acting control modes are both supported in the same body.
Barbed-hose integration
A 1/4 in male barbed hose port connects directly to flexible tubing without extra fittings, freeing the installer from threading or compression hardware. The versatile orientation and compact junction-box enclosure simplify placement inside damper housings or control panels.
Highlights
- Direct-acting control for precise air regulation
- 5 cfm air consumption supports smoke-damper operation
- 440/480 VAC 50/60 Hz suits industrial power supplies
- 0-25 psi range handles low-pressure pneumatic systems
- Die-cast aluminium body with steel cover resists harsh environments
Specifications
| Brand | Johnson Controls |
|---|---|
| Type | Thermostats & HVAC |
Questions about this item
What does the 1.5 cfm air consumption mean when the valve is installed in a smoke-damper system?
It indicates the valve uses 1.5 cubic feet of air per minute during operation, which determines the compressor capacity needed for reliable damper actuation.
How does the 440/480 VAC rating at 50/60 Hz affect wiring and control-circuit compatibility?
The coil is designed for direct connection to 440 or 480 volt AC supplies at either 50 or 60 Hz, so the control circuit must match that voltage and frequency without a transformer.
What mounting and piping provisions does the die-cast aluminum body with 1/4-inch barbed hose ports require?
The body accepts versatile orientation mounting and uses male 1/4-inch barbed hose fittings for the common port, allowing direct push-on tubing connections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
