We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Johnson Controls Inc

Johnson Controls P599RAPS102K pressure transducer 0-200 psi 304L SS

SKU CH-CY50-1M1VC

Measures 0 to 200 psi with a 0.5 to 4.5V DC output and +/-1.50% accuracy in a 304L stainless steel housing rated IP67

  • Accurate readings within 1.50 % across 0–200 psi
  • 5–4.5 V DC output suits low-voltage controls
  • IP67 stainless housing resists water and dust ingress
  • Operates reliably from –40 °F to 212 °F
  • 1/8 in male NPT fits standard pressure ports

Johnson Controls P599RAPS102K Transducer

The Johnson Controls P599RAPS102K is a pressure transducer built for 0 to 200 psi monitoring. It uses a 304L stainless steel housing and fitting for corrosion resistance. The unit outputs a 0.5 to 4.5V DC signal via a 3-pin Packard connector. It operates on a 4.75 to 5.25V DC supply.

Suits high-pressure wash systems needing IP67

This transducer fits pressure washing equipment requiring a male 1/8 inch NPT process connection. The IP67 rating protects against dust and water ingress during wash-down. Buyers needing a different pressure range or output protocol should look at other models. Installers without a Packard mating connector must source one separately.

0 to 200 psi range with +/- 1.50% accuracy

The sensor covers a 0 to 200 psi span with a stated accuracy of +/- 1.50 percent. This single specification determines if the resolution meets your control loop requirements. The 0.5 to 4.5V DC output scales linearly across this range. Verify the span matches your controller input expectations before purchase.

Highlights

  • Accurate readings within 1.50 % across 0–200 psi
  • 5–4.5 V DC output suits low-voltage controls
  • IP67 stainless housing resists water and dust ingress
  • Operates reliably from –40 °F to 212 °F
  • 1/8 in male NPT fits standard pressure ports

Specifications

BrandJOHNSON CONTROLS

Questions about this item

Does the P599RAPS102K come with the 3-pin Packard connector and cable, or must I source the mating plug separately?

The transducer has a 3-pin Packard connector built in; a mating plug and cable are not included and must be obtained separately.

How do I decide between the 0-200 psi range and other ranges in the P599 series?

Choose the 0-200 psi version when your system pressure stays within that span; the 1.50% accuracy applies across the full range.

What does the 0.5 to 4.5V DC output mean for my controller's analogue input?

The signal swings from .5 V at 0 psi to 4.5 V at 200 psi, giving a 4 V span for a 5 V ADC reference.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.