We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Johnson Controls Inc

Johnson Controls Inc P499VCP-105K pressure transducer 0 to 500 PSI

SKU CH-AN6G-PEDG7

Pressure transmitter covers 0 to 500 psi with 0 to 10V DC output and IP67 stainless housing

  • 0–500 psi range covers high-pressure wash systems
  • ±1 % full-scale accuracy ensures reliable pressure feedback
  • 0–10 V DC output integrates with standard controllers
  • IP67 stainless housing resists water and dust ingress
  • 40 °F to 185 °F operating span suits extreme environments

Pressure transducer for 500 psi systems

The Johnson Controls P499VCP-105K measures pressure from 0 to 500 psi in pressure washer installations. It delivers a 0 to 10V DC output signal proportional to the applied pressure. The unit operates on a 12 to 30V DC supply and suits industrial or commercial cleaning equipment.

Stainless steel housing with IP67 rating

A stainless steel body protects the sensor against corrosion and achieves an IP67 ingress rating for dust and water resistance. The male process connection uses a 1/4 inch SAE 45 degree flare fitting. Electrical termination is a 3-pin Packard connector with three wires.

Accuracy and temperature limits

Measurement accuracy is specified at +/-1 percent of full scale across the range. The transducer functions between -40 and 185 degrees Fahrenheit. The 0 to 10V output requires a compatible controller input and stable DC power within the stated voltage window.

Highlights

  • 0–500 psi range covers high-pressure wash systems
  • ±1 % full-scale accuracy ensures reliable pressure feedback
  • 0–10 V DC output integrates with standard controllers
  • IP67 stainless housing resists water and dust ingress
  • 40 °F to 185 °F operating span suits extreme environments

Specifications

BrandJOHNSON CONTROLS

Questions about this item

What output signal does the P499 series 0 to 10V DC transducer provide at 500 PSI full scale?

The transducer outputs 0 to 10V DC across the 0 to 500 PSI range with +/-1% full-scale accuracy.

What process connection does the stainless steel housing use for mounting?

It uses a male 1/4 inch SAE 45-degree flare fitting for direct installation.

How do you wire the 3-pin Packard connector for 12 to 30V DC supply?

Connect the three wires to the Packard connector matching supply, ground and signal pins per the wiring diagram.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.