Champion Power Equipment
Champion Power Equipment C90018 generator cover grey 2000 series
- Generators
$18.99
0.00022542BTC
In stock
Johnson Controls Inc
Johnson Controls Inc P499ACP-107K pressure transducer 0-750 PSI
Pressure transducer measures 0 to 750 psi with 4 to 20mA output and IP67 stainless housing
- 0–750 PSI range covers demanding pressure-washer systems
- ±1 % full-scale accuracy keeps readings reliable
- 4–20 mA output on three wires simplifies integration
- IP67 stainless housing withstands water and dust ingress
- Operates from −40 °F to 185 °F for year-round use
Pressure transducer for 0–750 psi systems
The Johnson Controls P499 series transducer measures gauge pressure from 0 to 750 psi and outputs a 4 to 20 mA DC signal. It operates on a 9 to 30 V DC supply and is suited for industrial monitoring and control loops that require a two-wire current output.
Stainless housing with IP67 rating and SAE flare
A stainless steel body rated IP67 resists water ingress and corrosion in wash-down or outdoor environments. The male 1/4 inch SAE 45 degree flare process connection threads directly into compatible ports, while the three-pin Packard connector provides a secure, keyed electrical interface for field wiring.
Accuracy and temperature limits define
Accuracy is specified at ±1 percent of full scale across the calibrated range. The unit functions between -40 and 185 degrees F, so installations outside this thermal window or applications demanding tighter tolerance will need a different specification.
Highlights
- 0–750 PSI range covers demanding pressure-washer systems
- ±1 % full-scale accuracy keeps readings reliable
- 4–20 mA output on three wires simplifies integration
- IP67 stainless housing withstands water and dust ingress
- Operates from −40 °F to 185 °F for year-round use
Specifications
| Brand | JOHNSON CONTROLS |
|---|
Questions about this item
What pressure range does the P499ACP-107K transducer cover?
It measures from 0 to 750 psi with an accuracy of ±1 % of full scale and provides a 4 to 20 mA DC output powered by 9 to 30 V DC.
Which process connection does the transducer use for mounting?
It has a male 1/4 in SAE 45-degree flare fitting that threads directly into a matching port.
How is the electrical connection made on this transducer?
A three-wire lead terminates in a 3-pin Packard connector; connect supply positive, signal and ground to the corresponding pins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
