JivDaw SUP Electric Air Pump 20 PSI 12000 mAh 12 pack
A 12-pack of battery-powered electric pumps inflates paddle boards to 20 PSI and runs from a 12000 mAh pack or 12 V car connector
- Inlet Size1 sup x 1 sup x 1 sup
- Outlet Size1 sup x 1 sup x 1 sup
- MaterialNitrile
- Compatibility/FitmentJivDaw
- Frequency Hznot_applicable
- Current TypeBattery Powered
- Inflates up to 3 boards per charge with 12000 mAh battery
- Dual power via 12V DC car connector and built-in battery
- Auto-stops at preset pressure up to 20 PSI on LED display
- Active cooling prevents overheating during continuous multi-board inflation
- Built-in deflation speeds packing for SUPs kayaks and air mattresses
JivDaw SUP Electric Air Pump 20 PSI 12 pack
The JivDaw SUP Electric Air Pump delivers up to 20 PSI using dual-stage technology and a 12,000 mAh battery. It inflates up to three paddle boards per charge, making it suitable for groups, families, and owners of multiple boards. The pump includes a built-in deflation function for faster packing of SUPs, kayaks, tents, and air mattresses. It operates on 11.1 volts input voltage with battery power.
Dual power installation and common issues
Connect the pump via the 12V DC car connector with its 15A safety fuse or run it from the integrated battery. Setup is straightforward: attach the hose, set the target pressure on the LED display, and start. The smart auto-off system stops inflation at the chosen PSI or BAR for hands-free operation. The main limitation is the three-board capacity per charge, which may require recharging for larger fleets.
Capacity and headroom for typical use
The pump comfortably handles paddle boards up to 15 PSI in Paddle Mode and up to 20 PSI in Free Mode. It also deflates inflatables to reduce storage space. Continuous operation is supported by an independent active cooling system that prevents overheating. It runs out of headroom when more than three boards need inflation on a single charge or when pressure requirements exceed 20 PSI.
Highlights
- Inflates up to 3 boards per charge with 12000 mAh battery
- Dual power via 12V DC car connector and built-in battery
- Auto-stops at preset pressure up to 20 PSI on LED display
- Active cooling prevents overheating during continuous multi-board inflation
- Built-in deflation speeds packing for SUPs kayaks and air mattresses
Specifications
| Inlet Size | 1 sup x 1 sup x 1 sup |
|---|---|
| Outlet Size | 1 sup x 1 sup x 1 sup |
| Material | Nitrile |
| Compatibility/Fitment | JivDaw |
| Frequency Hz | not_applicable |
| Current Type | Battery Powered |
| Input Voltage | 11.1 volts |
| Phase | 11.1 volts |
| Port Size | 12V DC car connector, USB Type C |
| Housing Material | Acrylonitrile Butadiene Styrene |
| Impeller Material | Acrylonitrile Butadiene Styrene |
| Size/Dimensions | 14.9098 cm x 23.6982 cm x 25.6032 cm |
| Item Count | 12 pack |
| Parts | 2 Years Warranty |
| Labor | 2 Years Warranty |
| Brand | JivDaw |
| Model | SUP Electric Air Pump |
Questions about this item
How do I know the pump reached the target pressure after setup?
The LED display shows real-time pressure and the pump stops automatically when it hits the set PSI or BAR value.
What is included in the 12 pack and what must I buy separately?
The pack contains twelve JivDaw SUP Electric Air Pumps with 12V DC car connectors, USB Type C ports, and built-in 12,000mAh batteries; no extra items are included.
Which version should I choose for inflating up to three paddle boards per charge?
This 20 PSI model with 12,000mAh battery inflates up to three boards per charge and offers Paddle Mode at 15 PSI and Free Mode at 20 PSI.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



