JinTaoRui
JinTaoRui JM-CT4-12 Wire Stripper Cutting Plier
A 2-in-1 tool-steel wire stripper and cutter handles 10-22 AWG with a safety lock to prevent automatic opening
- Strips 10-22 AWG wires cleanly with built-in cutter and looping holes
- Safety lock prevents spring-loaded automatic opening during storage or transport
- Sharp serrated plier nose grips and pulls wires without damaging cores
- Lightweight 115 g tool steel body with PP and TPR handles for comfort
- Compact 17.5 cm length fits tight panels in automotive, appliance and DIY jobs
Wire stripper for 10–22 AWG
The JinTaoRui JM-CT4-12 is a 2-in-1 wire stripper and cutter built from tool steel with PP and TPR handles. It handles solid and stranded wire from 0.6 to 2.6 mm diameter. A built-in safety lock prevents the spring-loaded jaws from opening accidentally. The tool suits automotive circuits, appliance wiring, computer cables and general DIY tasks.
Hand force and grip comfort
The 115 g tool uses a plier-style nose with sharp serrated edges to grip and pull wire without damaging cores. Looping holes and a convenient cutter are integrated into the jaw profile. PP and TPR handle materials reduce hand fatigue during repetitive stripping. No external power or adjustment is required for normal operation.
Stripping range 0.6–2.6 mm
This single specification decides fit: the tool only strips wire between 10 and 22 AWG. Buyers needing to process thicker battery cables or finer data conductors outside this range cannot use it. The fixed jaw geometry does not adjust beyond the stated diameter limits.
Highlights
- Strips 10-22 AWG wires cleanly with built-in cutter and looping holes
- Safety lock prevents spring-loaded automatic opening during storage or transport
- Sharp serrated plier nose grips and pulls wires without damaging cores
- Lightweight 115 g tool steel body with PP and TPR handles for comfort
- Compact 17.5 cm length fits tight panels in automotive, appliance and DIY jobs
Specifications
No published specifications for this item yet.
Questions about this item
How do I adjust the stripper for 10-22 AWG wire without nicking the core?
Select the correct gauge hole matching 0.6-2.6 mm diameter, insert the wire fully, squeeze the handles firmly, then pull straight out; the built-in cutter and looping holes help form clean loops without damaging the core.
Which parts of the JM-CT4-12 will wear out first and need replacement?
The sharp serrated edges on the plier nose and the stripping blades dull over time; the spring-loaded mechanism and safety lock may also lose tension with heavy use, but the tool steel body itself is not a replaceable component.
At what point does hand fatigue become the limiting factor during continuous stripping?
At 115 g weight and 17.5 cm length, the tool is light, but repetitive squeezing of the spring-loaded handles on 10-22 AWG wire causes grip fatigue before the stripper reaches any mechanical limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
