We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

JIMTAB

JIMTAB Cable-1002 SATA Power Splitter 19.7 in 15 Pin Male to 5 Female

SKU CH-2RXV-WRGPV

Splits one SATA power connector into five to run multiple drives from a single PSU port

  • TypeSATA
  • ColorBlack
  • Length19.7 Inch
  • Connector Number5
  • Connector Detail5 * SATA
  • Terminal GenderMale to Female
  • Powers five drives from one SATA port
  • 7 inch cable reaches drives across the case
  • Right-angle connectors keep routing flat and tidy
  • Compatible with 2.5 and 3.5 inch SATA drives
  • Supports 3.3 V, 5 V and 12 V rail voltages

Five-drive SATA power splitter

The JIMTAB Cable-1002 converts one 15-pin SATA power connector into five female sockets, letting builders run up to five drives from a single power-supply lead. It suits system integrators adding multiple 2.5-inch SSDs, 3.5-inch hard drives or optical units without free power connectors.

15-pin male to five female layout

The splitter presents one standard 15-pin SATA male plug and five 15-pin female receptacles, so compatibility hinges on the power supply having a spare SATA power output. Each branch carries 3.3 V, 5 V and 12 V lines, matching the voltage requirements of SATA I, II and III devices.

500 mm overall reach with staggered branches

The cable runs 500 mm total, with the first segment at 23.5 cm and four subsequent segments at 13.5 cm each, giving enough slack for typical drive-cage spacing. It handles five drives simultaneously, but the single upstream connector means total current draw must stay within the power supply's SATA rail limit.

Highlights

  • Powers five drives from one SATA port
  • 7 inch cable reaches drives across the case
  • Right-angle connectors keep routing flat and tidy
  • Compatible with 2.5 and 3.5 inch SATA drives
  • Supports 3.3 V, 5 V and 12 V rail voltages

Specifications

BrandJIMTAB
ModelCable-1002
TypeSATA
ColorBlack
Length19.7 Inch
Connector Number5
Connector Detail5 * SATA
Terminal GenderMale to Female
SpecificationsSATA 1 Male to 5 Female
FeaturesSATA Power 1 Male to 5 Female

Questions about this item

How many drives can the 15-pin male connector power at once?

The splitter provides five 15-pin female receptacles so you can connect up to five SATA drives — hard drives, SSDs or optical drives — from a single power supply port.

What voltages does the cable carry for SATA I, II and III devices?

It passes the standard 3.3 V, 5 V and 12 V lines required by SATA I, II and III drives, distributing whatever the power supply delivers across all five connectors.

What length and bend radius should I plan for when routing the cable?

Total length is 19.7 in (500 mm) with a 23.5 cm lead plus four 13.5 cm segments; the right-angle parallel design lies flat and bends easily for tight chassis routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.