We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow PLA filament on a 1 kg spool, 1.75 mm diameter

JG MAKER

JG MAKER PLA Filament 1.75mm Yellow 1kg

SKU CH-7DCD-EBRSY

Yellow 1.75 mm PLA+ filament on a 1 kg spool with ±0.02 mm dimensional accuracy for clog-free, bubble-free printing at 200–230 °C

  • ColorYellow
  • Diameter1.75 mm
  • 1 kg spool gives plenty of material for large prints
  • ±0.02 mm diameter accuracy ensures consistent extrusion
  • Clog-free and bubble-free formulation keeps prints running smoothly
  • 100 % biodegradable PLA reduces environmental impact
  • Works with most printers at 200–230 °C nozzle temperature

PLA+ filament for everyday printing

JG MAKER PLA+ filament comes on a 1 kg spool with a 1.75 mm diameter and a yellow colour. It is made from biodegradable, non‑toxic material derived from renewable resources. The formulation targets reliable feeding without clogging or bubbles. It suits hobbyists, educators and makers who need consistent results on standard FDM printers.

Tight tolerance and spool handling

Dimensional accuracy is specified at +/- 0.02 mm, which helps maintain steady extrusion across long prints. Full mechanical winding and a manual inspection keep the filament tidy and tangle‑free on the spool. The supplier recommends inserting the free end into the side holes after each use to prevent snarls. Unpack only when ready to print and store in a cool, dry place.

Broad printer compatibility and temperature window

The material works with JG MAKER machines and other brands that accept 1.75 mm PLA. Recommended nozzle temperature ranges from 200 to 230 °C, while the heated bed can be set between 0 and 80 °C if available. It can also be used in 3D pens. Builders who require a different diameter or a non‑PLA material will need a separate product.

Highlights

  • 1 kg spool gives plenty of material for large prints
  • ±0.02 mm diameter accuracy ensures consistent extrusion
  • Clog-free and bubble-free formulation keeps prints running smoothly
  • 100 % biodegradable PLA reduces environmental impact
  • Works with most printers at 200–230 °C nozzle temperature

Specifications

ColorYellow
Diameter1.75 mm

Questions about this item

How should I store the spool to keep it from absorbing moisture?

Keep the filament in a cool, dry, ventilated place and only unpack it when you are ready to print.

What is the tightest dimensional tolerance this PLA holds?

The filament is manufactured to a dimensional accuracy of ±0.02 mm.

How hot does the nozzle need to run for this material?

Extrusion temperature should be set between 200 °C and 230 °C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.