We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange PLA filament spool 1.75 mm diameter 1 kg

JG MAKER

JG MAKER PLA Filament 1.75 mm Orange 1 kg

SKU CH-X6WT-D4PA4

PLA+ filament with ±0.02 mm accuracy on a 1 kg spool for reliable, clog-free 3D printing

  • ColorOrange
  • Diameter1.75 mm
  • Consistent extrusion with ±0.02 mm diameter accuracy
  • Reliable feeding from full mechanical winding and manual inspection
  • Biodegradable PLA+ formula reduces environmental impact
  • Broad printer compatibility at 200–230 °C nozzle temperature
  • Tangle-free spool design ensures smooth, uninterrupted prints

Orange PLA+ filament for general 3D printing

JG MAKER supplies this 1.75 mm orange PLA+ filament on a 1 kg spool. The material is formulated for reliable feeding and is described as clog-free, bubble-free and tangle-free. It is made from 100 % biodegradable, non-toxic renewable resources. The product is new and intended for hobbyists and makers who want a straightforward PLA+ option in a vivid orange colour.

Simple spool handling with a storage reminder

The filament is fully mechanically wound and manually examined to keep the coil tidy for easy feeding. Users should unpack the spool only when ready to print and store it in a cool, dry, ventilated place. After each session the loose end must be inserted into the side holes of the spool to prevent tangles. No special tools or printer modifications are required beyond standard 1.75 mm compatibility.

Consistent extrusion across long prints

Dimensional accuracy is held to +/- 0.02 mm, which helps maintain steady flow during extended printing sessions. The recommended nozzle temperature range is 200-230 °C with an optional bed temperature up to 80 °C. These settings support stable layer adhesion and reduce the risk of mid-print failures on compatible FDM printers and 3D pens.

Highlights

  • Consistent extrusion with ±0.02 mm diameter accuracy
  • Reliable feeding from full mechanical winding and manual inspection
  • Biodegradable PLA+ formula reduces environmental impact
  • Broad printer compatibility at 200–230 °C nozzle temperature
  • Tangle-free spool design ensures smooth, uninterrupted prints

Specifications

ColorOrange
Diameter1.75 mm

Questions about this item

How can I verify the filament feeds smoothly and prints without clogs after loading it?

Check that the spool unwinds tidily with no tangles, then run a test print at 200-230°C nozzle temperature; consistent extrusion and no bubbles confirm it is working as intended.

What comes with the spool and is anything else needed to start printing?

The box contains a 1 kg spool of 1.75 mm orange PLA+ filament; no extra items are included, so you only need a compatible 3D printer or 3D pen.

Which diameter and weight option should I choose for a standard 1.75 mm printer?

This product is the 1.75 mm diameter on a 1 kg (2.2 lbs) spool, matching the vast majority of desktop FDM printers and 3D pens.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.