We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PLA filament spool 1.75 mm diameter 1 kg

JG MAKER

JG MAKER PLA Filament 1.75 mm 1 kg Red

SKU CH-3VP6-Z0AZX

1.75 mm PLA+ filament on a 1 kg spool with ±0.02 mm accuracy for clog-free printing

  • ColorRed
  • Diameter1.75 mm
  • Reliable feeding with dimensional accuracy ±0.02 mm
  • Clog-free and bubble-free for consistent extrusion
  • Tangle-free mechanical winding simplifies spool handling
  • Biodegradable PLA from renewable resources reduces environmental impact
  • Compatible with most 3D printers at 200–230 °C nozzle temperature

What this filament is and who it suits

JG MAKER supplies a 1.75 mm PLA+ filament on a 1 kg spool coloured red. It is made for hobbyists and makers who run fused-deposition printers or 3D pens and want a biodegradable, non-toxic material that feeds reliably without clogging or bubbling.

Practical limits of the 1.75 mm PLA standard

The filament holds a dimensional accuracy of ±0.02 mm, with the supplier also noting ±0.03 mm and ±0.05 mm in different references. Recommended nozzle temperature sits between 200 °C and 230 °C, while a heated bed up to 80 °C is optional. Printers that cannot reach these temperatures or that require a different diameter will not work with this spool.

Build quality and daily handling

Full mechanical winding and a manual inspection keep the coil tidy and tangle-free, so the filament unwinds smoothly during long prints. The supplier advises storing the spool in a cool, dry, ventilated place and threading the loose end into the side holes after each session to prevent knots. Its 100 % biodegradable composition means no harmful fumes during printing.

Highlights

  • Reliable feeding with dimensional accuracy ±0.02 mm
  • Clog-free and bubble-free for consistent extrusion
  • Tangle-free mechanical winding simplifies spool handling
  • Biodegradable PLA from renewable resources reduces environmental impact
  • Compatible with most 3D printers at 200–230 °C nozzle temperature

Specifications

ColorRed
Diameter1.75 mm

Questions about this item

Which diameter and spool size should I choose?

This filament comes in a 1.75 mm diameter on a 1 kg spool, weighing 2.2 lbs.

What does the ±0.02 mm accuracy mean for my prints?

The tight tolerance keeps extrusion consistent, reducing clogs and giving smoother layers.

What nozzle and bed temperatures does this PLA need?

Extrude at 200-230 °C; a heated bed up to 80 °C is optional but helps adhesion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.