We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75 mm PLA+ filament on a 1 kg spool

JG MAKER

JG MAKER PLA+ Filament 1.75 mm 1 kg Black

SKU CH-4XZV-D05WD

1.75 mm PLA+ filament on a 1 kg spool with ±0.02 mm dimensional accuracy for reliable, clog-free printing

  • ColorBlack
  • Diameter1.75 mm
  • Reliable feeding with ±0.02 mm diameter accuracy
  • Clog-free and bubble-free extrusion for clean prints
  • Tangle-free spool winding ensures smooth material flow
  • 100 % biodegradable PLA+ from renewable resources
  • Works with JG MAKER and other 1.75 mm printers

Material and diameter

JG MAKER PLA+ filament comes on a 1 kg spool with a 1.75 mm diameter. It is formulated for reliable feeding and aims to prevent clogs, bubbles and tangles during printing. The material is 100 % biodegradable and non‑toxic, making it suitable for home, school or workshop use. Compatibility extends to JG MAKER printers and other machines that accept 1.75 mm PLA.

Print temperature and bed range

Normal extrusion temperatures sit between 200 °C and 230 °C, while the optional heated bed can run from 0 °C to 80 °C. These figures cover typical PLA+ printing without requiring an enclosure or specialised cooling. The filament’s dimensional accuracy is held to ±0.02 mm, supporting consistent flow and layer adhesion across long prints.

Spool handling and storage

Full mechanical winding and manual inspection keep the filament tidy on the spool for smooth, tangle‑free feeding. The supplier advises unpacking only when ready to print and storing the spool in a cool, dry, ventilated place to preserve quality. Users should insert the filament end into the side holes after each session to avoid knots. Buyers who need larger spool sizes or different diameters will have to look elsewhere.

Highlights

  • Reliable feeding with ±0.02 mm diameter accuracy
  • Clog-free and bubble-free extrusion for clean prints
  • Tangle-free spool winding ensures smooth material flow
  • 100 % biodegradable PLA+ from renewable resources
  • Works with JG MAKER and other 1.75 mm printers

Specifications

ColorBlack
Diameter1.75 mm

Questions about this item

How do I load the 1.75 mm PLA+ filament into my printer and what is the common mistake?

Heat the nozzle to 200-230°C, insert the filament end into the extruder until resistance is felt, and extrude until flow is steady. The common mistake is not seating the spool on the holder with the loose end secured in the side holes, which causes tangles during printing.

What maintenance or replacement will this 1 kg spool need over time?

The filament itself is consumed during printing and requires no maintenance. Replace the spool when the 1 kg of material is used up. Keep any unused portion sealed with desiccant in a cool, dry place to prevent moisture absorption that can cause bubbling or clogging.

What is the first limitation that appears during a long print with this PLA+?

Dimensional accuracy of +/- 0.02 mm is the tightest tolerance; any printer calibration drift beyond this range will show first as layer adhesion issues or dimensional inaccuracy in the finished part. Bed temperature up to 80°C helps adhesion but exceeding it offers no benefit for this material.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.