We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium desk clamp with three-section articulated boom arm extending to 41 inches, quarter-inch screw tip

JEBUTU MS05 Overhead Camera Desk Mount Stand 14.5"-41

SKU CH-CCYQ-ZCDWP

A detachable three-section aluminium boom arm extends from 14.5 to 41.14 inches with 360° rotation and a 1/4″ screw, clamped by a 1.96″ C-clamp for overhead streaming or photography

  • FinishDTMS05
  • MaterialsAluminum
  • Length3.6 L x 1.02 W x 41.14 H inches
  • Dimension3.6 in x 1.02 in x 41.14 in
  • Weight2.2 pounds
  • Adjustable height from 14.5 to 41.14 inches with detachable 3-section poles
  • Secure mounting on surfaces up to 1.96 inches thick with enlarged handle C-clamp
  • Full 360-degree positioning through 180-degree rotation per section
  • Lightweight aluminium construction at 2.2 pounds for easy transport and storage
  • Space-saving fold-away design keeps desktop clear when not in use

Overhead Camera Desk Mount Stand 14.5"-41

The JEBUTU MS05 is a detachable three-section aluminium arm that extends from 14.5 to 41.14 inches for overhead photography and streaming. It mounts to desks up to 1.96 inches thick using an enlarged handle C-clamp with a rubber pad. A standard 1/4-inch screw fits cameras, lights or microphones. Each section rotates 180 degrees for full 360-degree positioning.

Installation and Common Issues

Clamp the base to a suitable surface, connect the required number of poles and tighten the joint knobs to set the angle. The longer handle makes width adjustment easier than knob-type clamps. Over-tightening the joints can strip the threads, and the arm may sag if all three sections are extended horizontally with a heavy device attached.

Compatibility Checklist

Verify your desk or table edge is no thicker than 1.96 inches and has enough clearance for the clamp base. Ensure the mounted device uses a 1/4-inch thread and that its weight is manageable at the chosen extension length. Confirm you have sufficient space behind the desk for the arm to articulate through its 360-degree range without obstruction.

Highlights

  • Adjustable height from 14.5 to 41.14 inches with detachable 3-section poles
  • Secure mounting on surfaces up to 1.96 inches thick with enlarged handle C-clamp
  • Full 360-degree positioning through 180-degree rotation per section
  • Lightweight aluminium construction at 2.2 pounds for easy transport and storage
  • Space-saving fold-away design keeps desktop clear when not in use

Specifications

BrandJEBUTU
ModelMS05
Part NumberMS05
FinishDTMS05
MaterialsAluminum
Length3.6 L x 1.02 W x 41.14 H inches
Dimension3.6 in x 1.02 in x 41.14 in
Weight2.2 pounds

Questions about this item

How do I confirm the MS05 is holding the camera securely after I clamp it to a desk up to 1.96" thick?

Tighten the enlarged handle until the rubber pads grip the surface firmly, then mount the camera on the 1/4" screw and verify there is no wobble when you gently nudge the boom arm.

What comes in the box with the MS05 and do I need to buy any extra hardware to attach a camera or light?

The package includes the three detachable aluminium sections, the C-clamp base with enlarged handle, and the 1/4" mounting screw; no additional hardware is required for standard cameras or lights.

Should I use all three sections for a 41.14" reach or remove one for a lower 14.5" setup?

Use all three sections when you need the full 41.14" height for overhead shots; remove one or two sections to work closer to the desk at the 14.5" minimum height.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.