We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White in-ear wired earbuds with flat tangle-free cable and inline remote microphone

JBL

JBL T110-WHITE In-Ear Wired Headphones White

SKU CH-5TJD-12MBQ

Lightweight 12.7 g in-ear headphones with 9 mm drivers, tangle-free flat cable, one-button remote, microphone and 3.5 mm plug

  • TypeEarbud
  • ColorWhite
  • Driver Unit9mm
  • Frequency Response20Hz–20KHz
  • Input Impedance16 ohms
  • Sensitivity96 dB/mW
  • JBL Pure Bass Sound driven by 9mm dynamic drivers
  • Tangle-free flat cable resists knots during daily use
  • One-button remote with microphone controls calls and music
  • Three ear-tip sizes ensure a secure, comfortable fit
  • Lightweight 12.7 g design with 3.5 mm auxiliary plug

Essential In-Ear Headphones

The JBL T110-WHITE are lightweight wired earbuds weighing 12.7 g and finished in white. A 9 mm dynamic driver produces JBL Pure Bass Sound across a 20 Hz to 20 kHz frequency range. The 3.5 mm auxiliary plug connects directly to phones, laptops and tablets without batteries or pairing. A tangle-free flat cable and three ear-tip sizes are included for a secure fit.

Ideal for Simple Wired Listening

Commuters and students who want plug-and-play audio with a 1-button remote for calls and playback will appreciate the 16 ohm impedance and 96 dB/mW sensitivity. The 50.39 inch cable reaches pockets easily. Buyers who need wireless freedom, active noise cancellation or a detachable cable should consider other designs. The inline microphone handles voice but offers no advanced noise suppression.

Deciding Specification: 3.5 mm Wired Connection

The single factor that determines suitability is the 3.5 mm auxiliary plug. If your device has a headphone jack, these earbuds work immediately with no charging required. If your phone, tablet or laptop lacks that port, you will need an adapter or a different headphone type. The 9 mm driver and flat cable are secondary to this connectivity requirement.

Highlights

  • JBL Pure Bass Sound driven by 9mm dynamic drivers
  • Tangle-free flat cable resists knots during daily use
  • One-button remote with microphone controls calls and music
  • Three ear-tip sizes ensure a secure, comfortable fit
  • Lightweight 12.7 g design with 3.5 mm auxiliary plug

Specifications

BrandJBL
ModelT110-WHITE
Part NumberJBLT110WHTAME
TypeEarbud
ColorWhite
Driver Unit9mm
Frequency Response20Hz–20KHz
Input Impedance16 ohms
Sensitivity96 dB/mW
Ear CouplingEarbud
Weight12.7 g
Wireless TypeNo
FeaturesTangle-Free Flat Cable, JBL Pure Bass Sound, 1-Button Remote with Microphone, 3.5mm Plug, 9mm Dynamic Driver, 20Hz - 20kHz Frequency Response, 16ohm Impedance, Auxiliary Connectivity, Accessories Included: 3 x Ear Tip Sizes

Questions about this item

Which ear-tip size should I pick from the three included with the JBL T110?

Start with the medium pair that comes pre-fitted, then swap to the small or large set if the seal feels loose or too tight; a proper seal gives the full 96 dB/mW sensitivity and 20 Hz – 20 kHz response.

What does the 96 dB/mW sensitivity mean for everyday listening?

At 16 ohms impedance the drivers reach loud volume from a phone or laptop 3.5 mm jack without extra amplification, so music and calls sound clear at low device volume settings.

How does the 3.5 mm auxiliary plug limit compatibility?

The analogue 3.5 mm connector works with any device that has a standard headphone socket — phones, tablets, laptops, consoles — but cannot connect directly to USB-C or Lightning ports without a separate adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.