We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White wall-mountable speaker with 5.25 inch ceramic woofer and dual aluminum tweeters

JBL

JBL Control HST 5.25" Woofer 100 W RMS White home audio speaker

SKU CH-37BM-ZP64V

Wall-mountable speaker with a 5.25" ceramic woofer, dual 1" aluminum tweeters, 100 W RMS power and 88 dB sensitivity

  • Driver Units5.25" Ceramic 5.25" Ceramic Woofer 1" Aluminum Tweeter 1" Al
  • Frequency Response68 Hz
  • Nominal Impedance8 Ohms
  • Sensitivity88 dB
  • ColorWhite
  • Wide coverage from dual tweeters and HST design
  • 100 W RMS power handles demanding playback
  • 68 Hz to 18 kHz response covers deep lows to crisp highs
  • 88 dB sensitivity delivers loud output with modest amplifier power
  • Wall-mount or surface-mount brackets suit flexible installation

Home audio speaker with HST

The JBL Control HST is a white home audio speaker built around a 5.25" ceramic woofer and dual 1" aluminum tweeters. It delivers 100 W RMS and 400 W PMPO output with an 8 Ohm nominal impedance and 88 dB sensitivity. The wide-coverage design uses HST technology for broad dispersion in residential or light commercial spaces.

Wall-mountable or surface-mount form factor

The cabinet measures 10.1" high, 14.3" wide and 8.3" deep and weighs 7.94 lb. It can be installed on a wall using the included U-bracket or placed on a surface without additional hardware. The 8 Ohm impedance allows straightforward pairing with most stereo amplifiers or multi-zone receivers.

Frequency response from 68 Hz to 18 kHz

The speaker reproduces bass down to 68 Hz and extends to 18 kHz, covering music and speech with balanced output. At 100 W RMS it handles moderate listening levels in medium rooms, while the 400 W PMPO peak provides headroom for dynamic passages. Buyers needing deeper low-frequency extension or higher continuous SPL will require a larger cabinet or a powered subwoofer.

Highlights

  • Wide coverage from dual tweeters and HST design
  • 100 W RMS power handles demanding playback
  • 68 Hz to 18 kHz response covers deep lows to crisp highs
  • 88 dB sensitivity delivers loud output with modest amplifier power
  • Wall-mount or surface-mount brackets suit flexible installation

Specifications

BrandJBL
Driver Units5.25" Ceramic 5.25" Ceramic Woofer 1" Aluminum Tweeter 1" Aluminum
Frequency Response68 Hz
Nominal Impedance8 Ohms
Sensitivity88 dB
ColorWhite

Questions about this item

How loud can the 100 W RMS speaker play continuously before the driver reaches its thermal limit?

The 5.25" ceramic woofer and dual 1" aluminum tweeters are rated for 100 W RMS continuous power, with a 400 W PMPO peak ceiling.

Does the 88 dB sensitivity and sealed cabinet keep noise and heat low during all-day playback?

At 88 dB sensitivity the speaker produces high output with modest amplifier current, and the wall-mount enclosure vents heat naturally during extended use.

What amplifier connections are required to drive the 8-ohm impedance and dual tweeter array?

A standard two-channel amp or receiver with 8-ohm speaker terminals and binding-post or banana-plug cables is all that is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.