We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular indoor/outdoor speaker with coaxial 8" Kevlar woofer and .98" tweeter

JBL

JBL AWC82 8" 2-way indoor/outdoor home audio speaker

SKU CH-PSKK-0464M MPN AWC82

Indoor and outdoor 2-way speaker with 8" Kevlar woofer, 0.98" tweeter, 80 Hz–20 kHz response and 94 dB sensitivity

  • Channels1
  • Sold As1
  • Driver Units7.87" Kevlar 7.87" Kevlar Woofer 0.98" Polymer Composite Twe
  • Frequency Response80 Hz
  • Nominal Impedance8 Ohms
  • Sensitivity94 dB
  • Weather-resistant build suits indoor and outdoor venues
  • 2-way coaxial design with 7.87" Kevlar woofer and .98" polymer composite tweeter
  • 94 dB sensitivity delivers strong output from modest amplifier power
  • 8 ohm nominal impedance matches standard audio systems
  • 80 Hz low-frequency response extends bass for full-range sound

Indoor/outdoor all-weather speaker

The JBL AWC82 is a compact two-way coaxial loudspeaker built for permanent installation in exposed locations. Its 7.87 inch Kevlar woofer and 0.98 inch polymer composite tweeter cover 80 Hz to 20 kHz at 94 dB sensitivity. The 8 ohm impedance suits standard amplifier outputs. A zinc-rich powder-coated steel U-bracket is included for surface mounting.

Mounting and system integration

The supplied U-bracket allows wall or ceiling attachment without additional hardware. At 12 inches high and 11.8 inches wide the enclosure fits tight soffits and narrow overhangs. The 8 ohm nominal load lets the speaker run directly from most commercial amplifiers without a matching transformer. One unit is sold per package so stereo pairs require two speakers.

Sustained-output behaviour

Rated at 250 W RMS the driver assembly handles continuous programme material in stadiums, water parks and cruise-ship decks without thermal compression. The 94 dB sensitivity means moderate amplifier power produces high sound-pressure levels over long periods. The weather-resistant cabinet and coated bracket resist corrosion from salt spray and pool chemicals during extended outdoor duty.

Highlights

  • Weather-resistant build suits indoor and outdoor venues
  • 2-way coaxial design with 7.87" Kevlar woofer and .98" polymer composite tweeter
  • 94 dB sensitivity delivers strong output from modest amplifier power
  • 8 ohm nominal impedance matches standard audio systems
  • 80 Hz low-frequency response extends bass for full-range sound

Specifications

BrandJBL
SeriesAWC82-BK, JBL AWC82-BK 8" 200w Black Indoor/Outdoor 70V Surface Mount Commercial Speaker
ModelAWC82-BK
Part NumberAWC82-BK
Channels1
Sold As1
Driver Units7.87" Kevlar 7.87" Kevlar Woofer 0.98" Polymer Composite Tweeter 0.98" Polymer Composite
Frequency Response80 Hz
Nominal Impedance8 Ohms
Sensitivity94 dB
ColorBlack
Dimensions & Weight16.7 in x 16.1 in x 15.5 in

Questions about this item

How low does the 8-inch Kevlar woofer extend before bass output drops off?

The woofer reaches down to 80 Hz, so frequencies below that will roll off noticeably during sustained playback.

After hours of continuous operation does the 94 dB sensitivity keep the amplifier cool or push it harder?

At 94 dB sensitivity and 8 ohms nominal impedance the speaker draws modest power, so most amplifiers stay cool even during all-day use.

The box includes a U-bracket but no wire — what gauge speaker cable is needed for the 8-ohm terminals?

Standard 16-gauge or thicker speaker wire works with the 8-ohm binding posts; no proprietary connector is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.