We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight small spools of PLA filament in assorted colours, each vacuum-sealed with desiccant

JAYO Rapid PLA Filament 1.75mm 2kg 8×250g

SKU CH-GHYQ-11TBX

Eight-colour PLA bundle with 250 g spools, 1.75 mm diameter and a 50–600 mm/s print range

  • Color0.25kg*8(black/White/Blue/Red/Pink/Orange/Yellow/Green)
  • MaterialPolylactic Acid
  • Weight2 kilograms
  • 2 kg total in eight 250 g spools across eight colours
  • Print speeds from 50 to 600 mm/s for faster builds
  • ±0.02 mm diameter tolerance prevents clogs and bubbles
  • Dried 24 hours and vacuum-sealed for reliable extrusion
  • Precise winding with clips stops tangles and breakage

Multi-colour 2 kg Rapid PLA bundle

This bundle supplies two kilograms of 1.75 mm Rapid PLA split across eight 250 g spools in black, white, blue, red, pink, orange, yellow and olive green. The small spool format suits makers who want a broad palette for multi-colour models or 3D pen work without committing to full kilogram rolls.

50–600 mm/s speed window and tolerance

The filament is rated for printing speeds from 50 mm/s up to 600 mm/s with a diameter tolerance of ±0.02 mm. Quick-cooling behaviour helps overhangs at high velocity, while the tight tolerance and 24-hour drying reduce clog risk across the stated speed range.

Nozzle and bed temperature compatibility

Your printer must reach a nozzle temperature between 190 °C and 260 °C and maintain a bed temperature of 50 °C to 60 °C. Verify that your hot-end and build surface can hold these temperatures before ordering.

Highlights

  • 2 kg total in eight 250 g spools across eight colours
  • Print speeds from 50 to 600 mm/s for faster builds
  • ±0.02 mm diameter tolerance prevents clogs and bubbles
  • Dried 24 hours and vacuum-sealed for reliable extrusion
  • Precise winding with clips stops tangles and breakage

Specifications

BrandJAYO
Color0.25kg*8(black/White/Blue/Red/Pink/Orange/Yellow/Green)
MaterialPolylactic Acid
Weight2 kilograms

Questions about this item

Should I buy the 8-roll pack or look for a single larger spool?

The bundle provides 2 kg total across eight 250 g spools in Black, White, Blue, Red, Pink, Orange, Yellow and Olive Green, letting you sample multiple colours without committing to a full kilogram of each.

What does the 600 mm/s top speed actually deliver on my printer?

Enhanced fluidity lets the filament melt and flow fast enough to sustain up to 600 mm/s while keeping layers consistent, overhangs clean and surface finish uniform across speed changes.

How does the ±0.02 mm tolerance and 1.75 mm diameter work with my extruder?

Tight diameter control and 24-hour drying plus vacuum sealing prevent clogs and bubbles, so the filament feeds smoothly through standard and high-speed 3D printers without tangling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.