Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936138BTC
In stock
Jay R. Smith Mfg. Co
Jay R. Smith Mfg. Co 800-Y03-35 Grease Interceptor 70 lb 35 gpm bathware
A coated fabricated steel grease interceptor with a 70 lb capacity and 35 gpm flow rate for 3 in drains, featuring a non-skid diamond plate cover and flow control
- TypeOther
- Handles 35 gpm flow for busy commercial kitchens
- 70 lb grease capacity reduces pump-out frequency
- Coated fabricated steel resists corrosion in wet environments
- Non-skid diamond plate cover improves workplace safety
- 3-inch no-hub connection fits standard drain piping
Product Identity
The Jay R. Smith Mfg. Co 800-Y03-35 is a coated fabricated steel grease interceptor designed for commercial kitchen drainage. It handles a flow rate of 35 gpm and stores up to 70 lb of grease capacity. The unit connects via a 3 in no-hub drain pipe and includes a flow control fitting.
Suitable Installations
This interceptor suits kitchens with sinks or dishwashers that produce moderate grease loads and can accommodate the 22 3/8 in overall height. Sites requiring a larger holding capacity or a higher flow rating should look at a different model. Installations lacking the vertical clearance for the 23 1/4 in width and 19 in depth footprint will also need an alternative.
Deciding Specification
The 70 lb grease capacity and 35 gpm flow rate are the primary figures that determine whether this unit matches the site load. If the calculated grease production exceeds 70 lb or the peak drainage flow surpasses 35 gpm, this interceptor will not meet code requirements.
Highlights
- Handles 35 gpm flow for busy commercial kitchens
- 70 lb grease capacity reduces pump-out frequency
- Coated fabricated steel resists corrosion in wet environments
- Non-skid diamond plate cover improves workplace safety
- 3-inch no-hub connection fits standard drain piping
Specifications
| Brand | SMITH LIGHT COMMERCIAL |
|---|---|
| Type | Other |
Questions about this item
Which capacity and flow-rate combination fits my kitchen-sink or dishwasher installation?
The unit handles 70 lb of grease and processes 35 gpm, sized for typical commercial sinks or dishwashers.
What does the 35 gpm rating mean once the interceptor is plumbed in?
It will pass up to 35 gallons per minute while separating fat, oil and grease before they enter the drain line.
How does the no-hub connection and 3-inch pipe diameter limit real-world installation?
The no-hub inlet and outlet accept 3-inch pipe directly, so the interceptor fits standard drain rough-ins without extra adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
