We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jaspertronics VLT-XD210LP projector lamp module in black housing

Jaspertronics

Jaspertronics VLT-XD210LP projector lamp 200W

SKU CH-7WKB-E3NCJ

Replacement lamp and housing module with 200 W output for Mitsubishi projectors including LVP-XD211U, MP514, PJD6210-WH, SD210U and XD211U

  • TypeProject Lamp
  • Weight0.9990
  • Original-spec lamp delivers full brightness and clarity
  • 200 W power rating matches Mitsubishi projector requirements
  • Compatible with LVP-XD211U, MP514, PJD6210-WH, SD210U, XD211U models
  • Pre-installed housing enables quick, tool-free replacement
  • Weighs 0.9990 kg for secure, stable mounting

Jaspertronics VLT-XD210LP projector lamp

The Jaspertronics VLT-XD210LP is a replacement lamp and housing module built to original specifications for Mitsubishi projectors. It restores full brightness and clarity for classrooms, meeting rooms and home cinema setups that rely on compatible Mitsubishi models. The unit arrives new and ready to install without additional tools.

Original components in a pre-assembled housing

The module ships as a complete lamp-and-housing assembly so installers avoid handling bare bulbs or aligning reflectors. Original inside components match the manufacturer's 200W AC power rating and 20.6 specification for consistent output and reliable ignition. At 0.9990 kg the unit fits the projector's existing mount points without modification.

Direct swap for VLT-XD210LP part numbers

This lamp replaces the Mitsubishi 5J.J0105.001 module and fits models including LVP-XD211U, MP514, PJD6210-WH, SD210U and XD211U. The upgrade is worth it when an existing lamp has reached its rated hours or shows dimming, colour shift or flicker. Buyers needing a different wattage, connector type or projector brand should verify compatibility before ordering.

Highlights

  • Original-spec lamp delivers full brightness and clarity
  • 200 W power rating matches Mitsubishi projector requirements
  • Compatible with LVP-XD211U, MP514, PJD6210-WH, SD210U, XD211U models
  • Pre-installed housing enables quick, tool-free replacement
  • Weighs 0.9990 kg for secure, stable mounting

Specifications

BrandJaspertronics
ModelVLT-XD210LP
Part NumberVLT-XD210LP
TypeProject Lamp
Weight0.9990

Questions about this item

What lamp power rating does the VLT-XD210LP module use and what brightness level does that cap in practice?

The module uses a 200 W AC lamp rated at 20.6 amps, which sets the maximum light output the projector can deliver.

Which Mitsubishi projector models share the exact housing dimensions so the VLT-XD210LP fits without modification?

Direct-fit models include the LVP-XD211U, MP514, PJD6210-WH, SD210U and XD211U, all referencing part 5J.J0105.001.

What is the correct installation sequence for the VLT-XD210LP and which step do installers most often skip?

Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the old module out, insert the new housing until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often missed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.