We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jaspertronics TDP-T250 projector lamp module in black housing

Jaspertronics

Jaspertronics TDP-T250 DLP Replacement Lamp

SKU CH-DGBC-MQ5JW

Replacement lamp and housing module for Toshiba TDP-T250 projectors with original specification bulb

  • TypeProject Lamp
  • Weight0.9990
  • Original-spec lamp restores factory brightness and clarity
  • Pre-assembled housing enables tool-free projector maintenance
  • One-year warranty covers full operational lifespan
  • Compatible with Toshiba TDP-T250 projectors
  • Lightweight module at 0.9990 kg simplifies handling

Jaspertronics TDP-T250 Lamp Module

The Jaspertronics TDP-T250 is a complete lamp and housing module built to original specifications for Toshiba projectors. It restores full brightness and clarity using an original specification bulb rated for its full lifespan. This unit is intended for owners of compatible Toshiba models who need a direct replacement to maintain factory image quality. It arrives new and ready for immediate installation.

Replaces Worn OEM Lamp Assembly

This module replaces a dimmed or failed original lamp inside the projector’s existing housing carriage. The jump is worth it when image brightness has dropped noticeably or the projector warns that lamp hours are exhausted. Swapping the entire housing avoids the alignment issues that can occur when only the bare bulb is changed. It returns the projector to its original light output without requiring firmware updates or menu recalibration.

Tool-Free Housing Swap

Installation typically requires opening the projector’s lamp door, removing the old housing, and sliding the new module into place until it seats firmly. No specialised tools are needed beyond a screwdriver for the door and housing screws. The most common issue is forgetting to reset the lamp-hour counter in the projector menu after installation, which can leave the replacement warning active. Ensure the housing locks securely to prevent intermittent shutdowns caused by a loose connection.

Highlights

  • Original-spec lamp restores factory brightness and clarity
  • Pre-assembled housing enables tool-free projector maintenance
  • One-year warranty covers full operational lifespan
  • Compatible with Toshiba TDP-T250 projectors
  • Lightweight module at 0.9990 kg simplifies handling

Specifications

BrandJaspertronics
ModelTDP-T250
Part NumberTDP-T250
TypeProject Lamp
Weight0.9990

Questions about this item

Which Toshiba projector models accept the TDP-T250 lamp and housing module?

The module is built for Toshiba projectors that use the TDP-T250 part code, so match that code on your projector's label or manual before ordering.

What is the correct way to seat the TDP-T250 housing during installation?

Align the housing guide rails with the projector's lamp cavity, press firmly until the latch clicks, then tighten the retaining screw — skipping the screw leaves the lamp loose and causes shutdowns.

How do I know when the original-specification bulb inside the TDP-T250 needs replacing?

The projector will dim noticeably or display a lamp-replacement warning once the bulb reaches the end of its rated lifespan; swap the module at that point.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.