We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jaspertronics SP-LAMP-070 projector lamp module in black housing with 240W 20.8V bulb

Jaspertronics

Jaspertronics SP-LAMP-070 projector lamp 240W 20.8V

SKU CH-T9K1-ZQ99B

A 240 W, 20.8 V projector lamp module weighing 0.95 kg, supplied new for Infocus projectors

  • TypeProject Lamp
  • Weight0.9500
  • Original-spec 240 W lamp restores full brightness and clarity
  • Authentic housing module fits Infocus projectors without modification
  • New condition guarantees full rated lifespan from first use
  • 8 V operating voltage matches factory electrical requirements
  • Lightweight 0.95 kg assembly eases ceiling-mount installation

Jaspertronics SP-LAMP-070 lamp module

The Jaspertronics SP-LAMP-070 is a new lamp and housing module rated at 240W and 20.8V. It is built to original specifications for compatible Infocus projectors. The unit weighs 0.9500 and carries a one-year warranty. It restores full brightness and clarity for projector maintenance.

Buyers needing a direct replacement

This module suits owners of Infocus projectors that require the SP-LAMP-070 part code. It is not for buyers who need a bare bulb without housing. It is not for users whose projectors accept a different lamp code or wattage. It is not for installations requiring a different voltage or connector type.

Deciding specification: 240W 20.8V lamp type

The critical specification is the 240W 20.8V lamp type designated as SP-LAMP-070. Match this exact code and power rating to your projector's requirements before purchase. Using an incorrect lamp type will prevent proper operation. Verify the part number against your device manual to ensure compatibility.

Highlights

  • Original-spec 240 W lamp restores full brightness and clarity
  • Authentic housing module fits Infocus projectors without modification
  • New condition guarantees full rated lifespan from first use
  • 8 V operating voltage matches factory electrical requirements
  • Lightweight 0.95 kg assembly eases ceiling-mount installation

Specifications

BrandJaspertronics
ModelSP-LAMP-070
Part NumberSP-LAMP-070
TypeProject Lamp
Weight0.9500

Questions about this item

How do I install the SP-LAMP-070 lamp and housing module in my Infocus projector, and what step is most often missed?

Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide out the old module, insert the new SP-LAMP-070 housing until it seats firmly, secure the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the step most often missed.

What maintenance or replacement will the SP-LAMP-070 need after extended use?

The 240 W lamp bulb inside the housing will gradually lose brightness; when image dimming becomes noticeable, replace the entire SP-LAMP-070 lamp and housing module — no separate filter or fan service is required for this unit.

What limit appears first when the SP-LAMP-070 runs continuously for long periods?

The 240 W lamp reaches its rated thermal limit first; sustained operation at full power causes brightness to decline as the bulb ages, signalling that the module should be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.