Jaspertronics
Jaspertronics Moon Lighting 5R Beam-LAMP 200W DLP Replacement Lamp
A 200 W discharge arc lamp delivering 7,200 lm at 8,000 K for Moon Lighting 5R Beam fixtures
- TypeProject Lamp
- Weight0.2000
- Delivers 7,200 lumens for bright stage projection
- 200 W discharge arc produces 8,000 K output
- 3,000-hour rated life reduces replacement frequency
- 1 mm arc gap enables precise beam control
- Compact 51×51×61 mm form fits Moon Lighting 5R Beam fixture
Compatible Fixtures
This replacement lamp fits the Moon Lighting 5R Beam fixture and other compatible moving-head units. It serves venues such as houses of worship, clubs, concerts, stages and theatres where a 200 W short-arc source is required. The lamp operates in any burning position, simplifying installation in various orientations.
Unsuitable Scenarios
Buyers who need a different wattage or arc gap should select another lamp type. Fixtures that require a specific base or connector not matching the 1.1 mm arc specification will not accept this unit. Applications demanding a higher CRI than 70 or a colour temperature other than 8 000 K are not served by this model.
Decisive Specification
The 1.1 mm arc gap determines optical alignment and focus inside the fixture. If the original lamp specifies a different arc dimension, this replacement will not produce the correct beam pattern. Verify the arc gap before purchase to ensure proper performance.
Highlights
- Delivers 7,200 lumens for bright stage projection
- 200 W discharge arc produces 8,000 K output
- 3,000-hour rated life reduces replacement frequency
- 1 mm arc gap enables precise beam control
- Compact 51×51×61 mm form fits Moon Lighting 5R Beam fixture
Specifications
| Brand | Jaspertronics |
|---|---|
| Model | Moon Lighting 5R Beam-LAMP |
| Part Number | Moon Lighting 5R Beam-LAMP |
| Type | Project Lamp |
| Weight | 0.2000 |
Questions about this item
What fixture must I already own for this 200 W 5R beam lamp to work?
It is built for the Moon Lighting 5R Beam fixture and also fits other units that accept an MSD200R5 or MSD200S5 lamp code.
How does the 1.1 mm arc gap interact with older ballasts in my existing rig?
The 1.1 mm arc gap and 75 V lamp voltage match standard 5R ballast outputs, so the lamp strikes reliably on compatible gear.
How can I confirm the 7,200 lm output and 8,000 K colour temperature are performing after installation?
Measure centre-beam illuminance with a calibrated lux meter and verify the white point reads near 8,000 K on a spectrometer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



