We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular projector lamp module in black plastic housing with integrated bulb assembly

Jaspertronics

Jaspertronics LMP-H280 Projector Lamp for Sony VPL-VW520ES 550ES 55ES 570ES 665ES 675ES 695ES 715ES

SKU CH-J4KT-RDDCD

Genuine 280W lamp and housing module fits Sony VPL-VW520ES, VPL-VW550ES, VPL-VW55ES, VPL-VW570ES, VPL-VW665ES, VPL-VW675ES, VPL-VW695ES and VPL-VW715ES projectors

  • TypeProject Lamp
  • Weight0.9990
  • Original OEM lamp module restores factory brightness
  • Authentic internal components ensure reliable projector performance
  • 280 W / 245 W dual-power lamp matches Sony specifications
  • Compatible with VPL-VW520ES, 550ES, 55ES, 570ES, 665ES, 675ES, 695ES, 715ES
  • Lightweight 0.999 kg housing simplifies installation

Compatible Sony Projector Models

This Jaspertronics LMP-H280 lamp and housing module is built for Sony VPL-VW520ES, VPL-VW550ES, VPL-VW55ES, VPL-VW570ES, VPL-VW665ES, VPL-VW675ES, VPL-VW695ES and VPL-VW715ES projectors. It serves owners of these specific models who need a direct replacement lamp assembly. Buyers with other Sony projectors or different brands cannot use this module.

Lamp Power and Electrical Specs

The lamp operates at 280W maximum and 245W minimum with a 1.0 AC current rating and 19.4 voltage specification. These electrical characteristics define its thermal output and power draw during normal projection use. The unit weighs .9990 and arrives in new condition with original internal components.

Installation and Housing Design

Supplied as a complete lamp and housing unit, it fits directly into the compatible Sony projectors without separate housing installation. The module frees the user from handling bare bulbs and aligns with the projector's existing lamp compartment. It includes a one-year warranty. Installers who need bare lamps or different connector types should look elsewhere.

Highlights

  • Original OEM lamp module restores factory brightness
  • Authentic internal components ensure reliable projector performance
  • 280 W / 245 W dual-power lamp matches Sony specifications
  • Compatible with VPL-VW520ES, 550ES, 55ES, 570ES, 665ES, 675ES, 695ES, 715ES
  • Lightweight 0.999 kg housing simplifies installation

Specifications

BrandJaspertronics
ModelLMP-H280
Part NumberLMP-H280
TypeProject Lamp
Weight0.9990

Questions about this item

How do I install the LMP-H280 lamp module, and what step is often missed?

Power off and unplug the projector, wait for full cool-down, remove the lamp cover, release the retaining screws, slide out the old module, insert the new LMP-H280 housing until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.

What maintenance or replacement will the LMP-H280 need later?

The 280 W / 245 W lamp itself is the only consumable; after its rated hours the brightness drops and the module must be swapped again — no filters or other parts require service on this housing.

What limit appears first during extended use of the 280 W lamp?

Sustained operation pushes the 280 W lamp toward its thermal and brightness half-life limit before any other component in the housing reaches a constraint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.