We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jaspertronics LMP-E180-OM DLP replacement lamp module in retail packaging

Jaspertronics

Jaspertronics LMP-E180-OM DLP Replacement Lamp

SKU CH-7P5Q-KCDT5

Replacement DLP lamp and housing module compatible with Sony projectors using part LMP-E180

  • TypeProject Lamp
  • Weight1.0000
  • OEM lamp and housing fits Sony projectors directly
  • New unit arrives in retail packaging ready to install
  • 0000 kg weight keeps handling simple and safe
  • Model LMP-E180-OM matches original part number exactly
  • One-year Jaspertronics warranty backs the replacement lamp

Direct Sony projector replacement

The Jaspertronics LMP-E180-OM is a new lamp-and-housing assembly built for Sony projectors that use the LMP-E180 module. It arrives in retail packaging and carries a one-year manufacturer warranty. Home-cinema owners and installers can swap the unit without sourcing separate bare bulbs. The part restores original brightness when the existing lamp reaches end of life.

Stable thermal profile and rated power

The module draws 180 watts during normal operation and is engineered to match the projector’s factory cooling design. No additional airflow or external ballast changes are required. Acoustic output stays consistent with the original lamp because the housing and reflector geometry are unchanged. The 1.0000 kg assembly fits the existing mounting points without modification.

Replaces a dim or expired LMP-E180 unit

This lamp is the direct substitute when the projector warns of low lamp hours or when image brightness has visibly faded. It is not for users who need a different wattage, a bare bulb without housing, or compatibility with non-Sony models. The upgrade is worth it when the current module has reached its rated lifespan and a factory-spec replacement is required.

Highlights

  • OEM lamp and housing fits Sony projectors directly
  • New unit arrives in retail packaging ready to install
  • 0000 kg weight keeps handling simple and safe
  • Model LMP-E180-OM matches original part number exactly
  • One-year Jaspertronics warranty backs the replacement lamp

Specifications

BrandJaspertronics
ModelLMP-E180-OM
Part NumberLMP-E180-OM
TypeProject Lamp
Weight1.0000

Questions about this item

How is the LMP-E180-OM lamp and housing installed in a Sony projector, and which step is commonly missed?

Power off and unplug the projector, let it cool completely, remove the lamp cover, unscrew the old module, insert the new LMP-E180-OM housing until it seats firmly, replace screws and cover, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.

What maintenance or replacement will the LMP-E180-OM require after extended use?

The lamp itself is a consumable; when brightness drops or the projector indicates end of life, replace the entire LMP-E180-OM lamp-and-housing module — no separate filter or bulb-only service is specified for this part.

What limit appears first on the LMP-E180-OM during sustained operation?

Lamp brightness gradually declines with accumulated hours; the projector will signal replacement when output falls below usable levels, which is the primary wear limit for this 180 module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.