Jaspertronics
Jaspertronics KY KY-380-LAMP 380W 18R DLP replacement lamp
A 380 W short-arc discharge lamp rated at 20 000 lumens and 7 500 K, compatible with the KY KY-380 fixture and other moving-head models
- TypeProject Lamp
- Weight0.2000
- 380 W discharge lamp delivers 20,000 lumens for high-intensity projection
- 2 mm arc gap and 7,500 K colour temperature produce crisp, bright output
- Compatible with KY KY-380 and over 20 other moving-head fixtures
- 1,500-hour rated life supports extended show schedules
- Compact 58 x 58 x 66 mm bare bulb fits tight fixture housings
380W 18R DLP replacement lamp
This 380W 18R DLP replacement lamp is built for the KY KY-380 fixture and compatible moving-head units. It uses a short-arc discharge design rated at 20,000 lumens and 7,500 K colour temperature with a CRI of 80.
Suits venues needing high-intensity beam output
The lamp fits houses of worship, clubs, concerts, stage and theatre installations that run the listed fixtures. It is not for buyers who need a different wattage or arc gap, or for fixtures outside the published compatibility list.
1,500-hour average life with 1.2 mm arc gap
The 1.2 mm arc and any burning position give consistent output for typical show cycles. Output will decline after the rated 1,500 hours, requiring replacement to maintain peak intensity.
Highlights
- 380 W discharge lamp delivers 20,000 lumens for high-intensity projection
- 2 mm arc gap and 7,500 K colour temperature produce crisp, bright output
- Compatible with KY KY-380 and over 20 other moving-head fixtures
- 1,500-hour rated life supports extended show schedules
- Compact 58 x 58 x 66 mm bare bulb fits tight fixture housings
Specifications
| Brand | Jaspertronics |
|---|---|
| Model | KY KY-380-LAMP |
| Part Number | KY KY-380-LAMP |
| Type | Project Lamp |
| Weight | 0.2000 |
Questions about this item
Which fixture must I already own to install this KY KY-380-LAMP?
It fits the KY KY-380 fixture and listed compatibles such as Acme XP-380 BEAM, Martin ERA 500 Hybrid IP, HSLIGHT G380 and others.
Will the 1.2 mm arc gap and 7 500 K output match my older 380 W moving heads?
Yes — the 1.2 mm arc gap and 7 500 K colour temperature are standard for 380 W 18R beam lamps, so older compatible heads will strike and colour-match correctly.
How can I verify the lamp is performing to spec after fitting?
Expect roughly 20 000 lumens at start-up, a stable arc at the rated 1.2 mm gap, and about 1 500 hours before output drops noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



