We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A rectangular DLP replacement lamp module in a black plastic housing with a glass bulb visible inside

Jaspertronics

Jaspertronics KDF-50E2000-LAMP dlp replacement lamp

SKU CH-FRQJ-AMTHW

DLP replacement lamp with housing for Sony KDF-50E2000, 100-120W 1.0 E 19.8A bulb rated 6000 hours

  • TypeProject Lamp
  • Weight0.9990
  • Ready-to-install housing saves setup time
  • Original-spec 100-120W 1.0 E 19.8A lamp restores factory brightness
  • 6 000-hour rating supports long viewing life
  • Direct fit for Sony KDF-50E2000 rear-projection TV
  • 240-day warranty backs reliable operation

Direct-fit replacement for Sony KDF-50E2000

This Jaspertronics lamp and housing assembly is built to the original specification for the Sony KDF-50E2000 rear-projection TV. It arrives new and ready to install, delivering the rated brightness and clarity from the first hour of operation.

Suitable for owners restoring a KDF-50E2000

The unit matches the 100-120W 1.0 E 19.8A lamp type and 6,000-hour rating specified for this model. Buyers who need a different wattage, current rating or physical housing for another television should look elsewhere.

Lamp type 100-120W 1.0 E 19.8A determines

Only sets that call for this exact electrical and mechanical profile will accept the module. Verify the service manual before ordering to ensure the part number aligns with your chassis.

Highlights

  • Ready-to-install housing saves setup time
  • Original-spec 100-120W 1.0 E 19.8A lamp restores factory brightness
  • 6 000-hour rating supports long viewing life
  • Direct fit for Sony KDF-50E2000 rear-projection TV
  • 240-day warranty backs reliable operation

Specifications

BrandJaspertronics
ModelKDF-50E2000-LAMP
Part NumberKDF-50E2000-LAMP
TypeProject Lamp
Weight0.9990

Questions about this item

Does the 0.999 kg housing slide into the Sony KDF-50E2000 without extra brackets?

Yes, the complete lamp-and-housing assembly is built to the original specification for the KDF-50E2000 and fits directly into the TV’s lamp compartment.

After removing the old module, do I just insert the new housing and tighten the captive screws?

Insert the assembly until it seats fully, then secure the captive screws; the step often missed is reseating the lamp door so the safety switch engages.

When should I plan to replace the 100-120 W bulb rated for 6,000 hours?

Expect roughly 6,000 hours of use; the TV will usually dim or show a lamp-warning indicator when the bulb nears end of life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.