Jaspertronics
Jaspertronics HD28DSE-LAMP DLP Replacement Lamp 210W 20.9V
A 210 W, 20.9 V DLP replacement lamp module rated for 4,000 hours at full power or 8,000 hours in eco mode
- TypeProject Lamp
- Weight0.9990
- Original-spec lamp & housing delivers full brightness and clarity for Optoma HD28DSE
- 210 W 20.9 V lamp provides 4,000 hours at full power
- Eco-mode extends usable life to 8,000 hours
- Unit weighs 0.9990 kg for straightforward installation
- New condition ensures reliable performance from first use
Jaspertronics HD28DSE-LAMP Replacement Lamp
This is a new DLP replacement lamp and housing module built to the original specification for the Optoma HD28DSE projector. It is intended for owners of that specific projector model who need to restore full brightness and clarity when the original lamp reaches end of life.
Original specification lamp and housing
The module arrives as a complete lamp-and-housing assembly, so no separate housing purchase or additional installation parts are required. The lamp inside matches the original 210W 20.9V rating, delivering the same brightness and colour performance the projector was designed for.
Rated 4,000 hours full power or 8,000 hours eco-mode
At full power the lamp provides up to 4,000 hours of operation before replacement is needed again. Switching the projector to eco-mode extends that window to 8,000 hours, giving flexibility for lighter daily use or longer maintenance intervals. Heavy daily use at full power will exhaust the rated lifespan sooner.
Highlights
- Original-spec lamp & housing delivers full brightness and clarity for Optoma HD28DSE
- 210 W 20.9 V lamp provides 4,000 hours at full power
- Eco-mode extends usable life to 8,000 hours
- Unit weighs 0.9990 kg for straightforward installation
- New condition ensures reliable performance from first use
Specifications
| Brand | Jaspertronics |
|---|---|
| Model | HD28DSE-LAMP |
| Part Number | HD28DSE-LAMP |
| Type | Project Lamp |
| Weight | 0.9990 |
Questions about this item
How often will the 210W 20.9V lamp module need replacing under typical use?
The lamp is rated for 4,000 hours at full power or 8,000 hours in Eco-mode, so replacement timing depends on which brightness setting you use daily.
What limit appears first when the projector runs continuously for long sessions?
The 4,000-hour full-power rating is the limiting factor; running at maximum brightness will reach end-of-life sooner than Eco-mode operation.
How much heat and fan noise should I expect from the 210W lamp during all-day operation?
At 210W power draw the lamp generates significant heat, so the projector’s cooling fans will run audibly to maintain safe temperatures throughout extended use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



