We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Xenon projector lamp, cylindrical metal body with ceramic end caps and cable lead

Jaspertronics

Jaspertronics Galaxy 4K-32 HFR-4.2kW-LAMP 4200W 1400 Hour Xenon L Series Lamp

SKU CH-DDYD-CCFPQ

4200W xenon L Series lamp rated for 1400 hours, compatible with Barco DP2K and DP4K digital cinema projectors

  • TypeProject Lamp
  • Weight6.0000
  • 4200W xenon output for high-brightness cinema projection
  • 1400-hour warranty rating for dependable long-term operation
  • Designed for Barco DP2K and DP4K series projectors
  • DXL-40BAF/L part number ensures exact fitment
  • 294mm lamp length with 123mm LCL for correct installation

Designed for Barco DP2K and DP4K cinema projectors

This 4200W xenon L Series lamp serves professional theaters, screening rooms, and high-demand projection environments. It matches the electrical and mechanical specifications required by compatible Barco platforms including DP2K-15C, DP2K-19B, DP4K-19B, DP2K-20C, DP2K-23B, DP4K-23B, DP2K-32B, DP4K-32B, DP-1500, DP-2000, and DP-3000. The 1400-hour warranty rating supports dependable service life in continuous operation.

Installation requires precise alignment of lamp

The lamp measures 294mm in total length with a 123mm LCL, 6mm cold arc gap, 60mm bulb diameter, and 131mm cable length. Correct orientation and secure electrical contact are critical; misalignment can cause premature wear or ignition failure. Only qualified technicians should perform replacement, following the projector manufacturer’s safety and handling procedures for high-voltage xenon short-arc lamps.

Verify your projector model

This lamp operates at 35V and 125A with an input power rating of 4200W and an operating range of 29404200W. Confirm that your Barco projector is listed among the compatible models and that the power supply can deliver the specified voltage and current. The part number DXL-40BAF/L (5002388) powered by Ushio must match the original equipment specification exactly; cross-referencing with other lamp types is not supported.

Highlights

  • 4200W xenon output for high-brightness cinema projection
  • 1400-hour warranty rating for dependable long-term operation
  • Designed for Barco DP2K and DP4K series projectors
  • DXL-40BAF/L part number ensures exact fitment
  • 294mm lamp length with 123mm LCL for correct installation

Specifications

BrandJaspertronics
ModelGalaxy 4K-32 HFR-4.2kW-LAMP
Part NumberGalaxy 4K-32 HFR-4.2kW-LAMP
TypeProject Lamp
Weight6.0000

Questions about this item

How do I verify the lamp is operating correctly after installation?

Check that the projector reports a stable 35V and 125A at the power supply and that the arc strikes cleanly within the 6mm cold arc gap during startup.

What comes in the box and what must be sourced separately?

The box contains the DXL-40BAF/L (5002388) xenon lamp module only; projector housings, cables, and any required alignment tools are supplied by the projector manufacturer.

Which lamp version matches my Barco DP4K-32B projector?

This 4200W L Series lamp with 294mm length, 123mm LCL, 60mm bulb diameter and 131mm cable is the specified replacement for the DP4K-32B and other listed DP2K/DP4K models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.