We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jaspertronics DT01291 projector lamp module in black housing

Jaspertronics

Jaspertronics DT01291 DLP Replacement Lamp 330W

SKU CH-GM68-0FF7P

330 W UHP lamp and housing module fits Hitachi CP-SX8350, CP-WU8450, CP-WX8255, CP-X8160, LWU501i and SP LAMP081 projectors

  • TypeProject Lamp
  • Weight0.9500
  • Ready for installation with original 330 W UHP bulb
  • Compatible with Hitachi CP-SX8350 and CP-WU8450 projectors
  • Supports CP-WX8255 and CP-X8160 models
  • Fits LWU501i and SP LAMP081 part numbers
  • Lightweight module at 0.95 kg for easy handling

Compatible Hitachi Models

The Jaspertronics DT01291 is a 330 W UHP replacement lamp module built for Hitachi projectors. It fits the CP-SX8350, CP-WU8450, CP-WX8255, CP-X8160, LWU501i and the SP LAMP081 assembly. Part numbers 456-8945 and 456-8971 are also covered. The unit ships new in a single pack.

Original Housing Build

Each module arrives as a complete lamp-and-housing assembly with original internal components. The pre-installed cage allows direct insertion without extra tools or alignment steps. At 0.95 kg it handles like the factory unit and the 330 W rating matches the projector’s specified power draw.

Pre-Purchase Checks

Confirm the projector model appears in the supported list above before ordering. Verify that the existing lamp code is DT01291 or one of the cross-referenced part numbers. Ensure the projector’s lamp timer can be reset after installation and that the operating environment meets the manufacturer’s ventilation requirements.

Highlights

  • Ready for installation with original 330 W UHP bulb
  • Compatible with Hitachi CP-SX8350 and CP-WU8450 projectors
  • Supports CP-WX8255 and CP-X8160 models
  • Fits LWU501i and SP LAMP081 part numbers
  • Lightweight module at 0.95 kg for easy handling

Specifications

BrandJaspertronics
ModelDT01291
Part NumberDT01291
TypeProject Lamp
Weight0.9500

Questions about this item

What lamp interface does the 330W UHP bulb use and what power does it draw?

The lamp uses the DT01291 housing interface and draws AC 330 W from the projector's ballast.

Which Hitachi projector models does the DT01291 housing fit?

It fits CP-SX8350, CP-WU8450, CP-WX8255, CP-X8160, LWU501i and part numbers 456-8945, 456-8971 and SP LAMP081.

How is the lamp module installed and what step is often missed?

Power off and cool the projector, remove the lamp cover, slide the DT01291 housing into the compartment until it seats firmly, secure the retaining screws, replace the cover, then reset the lamp timer in the menu.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.