We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jaspertronics

Jaspertronics DP4K-23B-2.8kW-LAMP 2800W 1700 Hour Xenon L Series Projector Lamp

SKU CH-ZKST-RPCFM

2800W xenon L Series lamp with 1700-hour rating for compatible Barco cinema projectors

  • TypeProject Lamp
  • Weight6.0000
  • 2800W xenon lamp powers bright cinema projection
  • 1700-hour rated life reduces replacement frequency
  • 30V 93A rating matches Barco projector specs
  • 294mm length and 123mm LCL ensure correct fit
  • 5mm cold arc gap supports stable operation

Cinema-grade replacement lamp

The Jaspertronics DP4K-23B-2.8kW-LAMP is a new 2800W xenon L Series lamp built for compatible Barco digital cinema projectors. It serves projectionists and theater technicians who need a direct replacement that restores specified brightness and color stability. The lamp arrives in new condition and matches the original equipment form factor for supported models.

1700-hour rated life and 2800W input

Rated at 30V and 93A with a 19602800W operating range, the lamp delivers consistent output for up to 1700 hours under normal cinema duty cycles. It handles the full power envelope of supported Barco platforms without derating. Light output will gradually decline as the arc ages, and the lamp must be replaced once the rated hours are reached to maintain screen luminance standards.

Fits DP4K-23B and listed Barco series

The lamp measures 294mm overall length with a 123mm LCL, 5mm cold arc gap, 53mm bulb diameter and 131mm cable length to match the mechanical and electrical interfaces of the DP2K15C, DP2K19B, DP2K20C, DP2K23B, DP2K32B, DP4K19B, DP4K23B, DP1500, DP2000 and DP3000. Correct fitment frees the projector from alignment drift and avoids the downtime caused by mismatched aftermarket units.

Highlights

  • 2800W xenon lamp powers bright cinema projection
  • 1700-hour rated life reduces replacement frequency
  • 30V 93A rating matches Barco projector specs
  • 294mm length and 123mm LCL ensure correct fit
  • 5mm cold arc gap supports stable operation

Specifications

BrandJaspertronics
ModelDP4K-23B-2.8kW-LAMP
Part NumberDP4K-23B-2.8kW-LAMP
TypeProject Lamp
Weight6.0000

Questions about this item

Will the 2800W 30V 93A lamp run in my DP2K15C projector?

Yes, the DXL-30BAF/L is compatible with DP2K15C, DP2K19B, DP2K20C, DP2K23B, DP2K32B, DP4K19B, DP4K23B, DP1500, DP2000 and DP3000 models.

How do I verify the lamp is operating correctly after installation?

Confirm the projector reports stable 30V 93A electrical parameters and achieves the rated 1700-hour service interval without premature arc instability.

Does the box include the 294mm lamp, cables and housing or must I buy a reflector separately?

The lamp ships as a complete DXL-30BAF/L module with 294mm length, 131mm cable, 53mm bulb diameter and 5mm cold arc gap; no separate reflector purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.