We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A new 7000W xenon projector lamp in a rectangular metal housing with ceramic end caps and electrical connectors

Jaspertronics

Jaspertronics DP2K-32B-7kW-LAMP 7000W Xenon projector lamp

SKU CH-5M52-MMYD4

7000W xenon replacement lamp rated for 300 hours in Barco digital cinema projectors

  • TypeProject Lamp
  • Weight6.0000
  • 7000W output powers large digital cinema projectors
  • 300-hour rated life reduces replacement frequency
  • Ushio DXL-70BA design approved for Barco DP2K-32B
  • Compatible with DP-3000, DP4K-32B and HDQ series
  • 2-hour on/off cycling delays flicker by 30%

Digital cinema xenon lamp

The Jaspertronics DP2K-32B-7kW-LAMP is a 7000W Ushio DXL-70BA xenon lamp rated for 300 hours of operation. It serves as a direct replacement for Barco digital cinema projectors including the DP-3000, DP2K-32B, DP4K-32B, DP4K-32Bx2, HDQ-2K40 and HDQ-4K35. The lamp is new and manufactured by Ushio America under part number 5002239.

Installation and common issues

The lamp installs into the projector’s dedicated xenon lamp housing using the standard mounting points for the listed Barco models. Technicians must handle the quartz envelope with clean gloves to avoid contamination that can cause premature failure. A frequent problem is ignoring the recommended on-off cycle; running the lamp continuously for 11 hours instead of cycling every 2 hours with a 10 minute off period can accelerate flicker onset by roughly 30 percent.

Critical specification: 7000W power rating

This lamp delivers exactly 7000W and is approved only for the projectors named above. Buyers who need a lower wattage lamp for smaller projectors or a different base type for non-Barco housings cannot use this part. The 300 hour rated life and Ushio manufacturing are fixed characteristics that determine whether the lamp matches the venue’s maintenance schedule and warranty requirements.

Highlights

  • 7000W output powers large digital cinema projectors
  • 300-hour rated life reduces replacement frequency
  • Ushio DXL-70BA design approved for Barco DP2K-32B
  • Compatible with DP-3000, DP4K-32B and HDQ series
  • 2-hour on/off cycling delays flicker by 30%

Specifications

BrandJaspertronics
ModelDP2K-32B-7kW-LAMP
Part NumberDP2K-32B-7kW-LAMP
TypeProject Lamp
Weight6.0000

Questions about this item

How can I verify the 7000W lamp is performing correctly after installation?

The projector should strike reliably and maintain steady brightness for the rated 300 hours without flicker; following the 2-hour on / 10-minute off cycle helps delay flicker onset by up to 30% compared with 11-hour continuous runs.

What comes in the box and what must I source separately?

The package contains the Ushio DXL-70BA xenon lamp module (part 5002239 / Barco R9855966); the projector housing, power supply and cooling system remain in the cinema projector and are not included.

Which version matches my DP2K-32B projector?

This DP2K-32B-7kW-LAMP is the direct 7000W replacement approved for the DP2K-32B, DP4K-32B, DP4K-32Bx2, DP-3000, HDQ-2K40 and HDQ-4K35 models; no other wattage or part number fits these units.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.